Breather Venting, weight reduction and other ramblings.
#76
Dont suppose you want to make another set ? The prices quoted for RS door panels are crazy considering how little is involved in making them.
#77
Burning Brakes
Thread Starter
Join Date: May 2007
Location: Birmingham, UK.
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
thats all i did too.
I have the templates for the rennline track mats - its a job on my list!
got the centre console out at the moment, i need to get it flocked and reinstalled.
along with the lower dash!
I have the templates for the rennline track mats - its a job on my list!
got the centre console out at the moment, i need to get it flocked and reinstalled.
along with the lower dash!
#79
Pro
Join Date: Oct 2004
Location: Leicestershire, UK
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Try Appbiz Mark, he was advertising a die cut set without coverings on here the other day for a decent price. Covering them is a pop, spray loads of glue on panels and plonk the pvc on top, fold over and glue or staple down, cut out holes and job done. That easy even I did it without swearing to much!
#80
Nordschleife Master
#82
https://rennlist.com/forums/4555655-post4.html
I know our cars are galvanized, but why encourage the potential hassle.
#83
thats a very valid point well made James, thanks. I will ask them for alternative underlay, that was just one he mentioned because they use it on a lot of classic cars apparently. I assumed it would be sealed with an outer plastic liner ?
And cheers Rob, will look out for that Appbiz offer.
Thanks also to Russ for the great gesture. Will see what happens with the potential carpet strip out first but may well take you up on that later !
And cheers Rob, will look out for that Appbiz offer.
Thanks also to Russ for the great gesture. Will see what happens with the potential carpet strip out first but may well take you up on that later !
#84
Race Car
WHO was it someone said had the "instructions" on how to install the APPBIZ carpets?? I just bought the RS kit and got it the other day...I can figure out about EIGHT pieces of it, the rest are almost a complete mystery!
#85
Drifting
Jeff,
If Thomas comes along he has pics and instructions that he sent me via Email, if it's ok I could mail you those.........................If I can find them..............PM me if My Memory proves erratic.
Kevin
P.S. its 03:00 here, I can't sleep & so may just slip my mind when I wake properly
If Thomas comes along he has pics and instructions that he sent me via Email, if it's ok I could mail you those.........................If I can find them..............PM me if My Memory proves erratic.
Kevin
P.S. its 03:00 here, I can't sleep & so may just slip my mind when I wake properly
#87
Pro
Join Date: Oct 2004
Location: Leicestershire, UK
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Jeff, I had two pieces left over at the end of the install, couldn't for the life of me figure out where they went?!?
#88
Jeff, i recently got those instruction and photo emails from Thomas. If you need them pm me and will send on to you.
Rob...you were going to send me your template measurements for the ply trackmat panels
Rob...you were going to send me your template measurements for the ply trackmat panels
#90
Race Car
Man, the pics from Thomas are the SHIZNITT!!
VERY VERY helpful, I have this planned for a week or so from now as I'm leaving for the track on Thursday...NO carpet.
I got about 300lbs out of the car in the last few months, it's been a journey...no carbon fiber or replacement fiberglass though.
RobConn, you said the radio block-off plate is still available, "If it fits your taste" - what did you mean by that comment?? ...is it UGLY?? I want to order one or make something as it will hide all that UGLY wiring you can see directly THRU the dash!
As for the Rennline track mats, I highly recommend them but mine came with a pair of gremlins that have "screw magnets" - I couldn't possibly count how many times in the last few weeks I've dropped a screw and DOWN they go, over to the edge of the track mats and GONE, underneath...I've had to remove the driver's side three times in the last week or so to recover a damn screw!
VERY VERY helpful, I have this planned for a week or so from now as I'm leaving for the track on Thursday...NO carpet.
I got about 300lbs out of the car in the last few months, it's been a journey...no carbon fiber or replacement fiberglass though.
RobConn, you said the radio block-off plate is still available, "If it fits your taste" - what did you mean by that comment?? ...is it UGLY?? I want to order one or make something as it will hide all that UGLY wiring you can see directly THRU the dash!
As for the Rennline track mats, I highly recommend them but mine came with a pair of gremlins that have "screw magnets" - I couldn't possibly count how many times in the last few weeks I've dropped a screw and DOWN they go, over to the edge of the track mats and GONE, underneath...I've had to remove the driver's side three times in the last week or so to recover a damn screw!