Will HD struts off a Turbo 964 work on a non turbo C4
#17
Good to know....the suspension in question is actually off my 91 turbo and is billstein HD's with custom H&R springs (I went JIC recently). Aeroman....if you're still interested the price just dropped!
#18
Rennlist Member
Me thinks the main difference between the turbo 3.6 and the turbo 3.3 front strut is the diameter of one or both of the mounting holes. I believe the bolt was increased in size for the 3.6. I have read that RUF recommended just drilling the hole larger to fit a 3.3 strut on the 3.6. Not sure of the issues going the other direction though it should "fit".
Elliot
#19
Three Wheelin'
Join Date: Dec 2006
Location: Texas
Posts: 1,506
Likes: 0
Received 0 Likes
on
0 Posts
damping may have changed also. i noticed that there was some play on the top hole by design on my 91 prob for alignment. i really doubt the 3.6 part on a 3.3 would pose an issue for most. 993 uprights for me some day. luckily with the jic i should be able to swap out the lower portion for 993.