964/993 Diagnostic Tool - Plug and play version.
Racer
Joined: Nov 2003
Posts: 424
Likes: 1
nirich,
Nice job! Is this based on my 993 PCB layout? (https://rennlist.com/forums/showthre...4&page=1&pp=40)
If so, there are some 993 guys who will be interested in buying your assembly. The Dual-K line setup would need to be intact.
Nice job! Is this based on my 993 PCB layout? (https://rennlist.com/forums/showthre...4&page=1&pp=40)
If so, there are some 993 guys who will be interested in buying your assembly. The Dual-K line setup would need to be intact.
Thread Starter
Rennlist Member
Joined: Oct 2005
Posts: 429
Likes: 45
From: Auckland, New Zealand
Yes cowtown, your PCB, the original circuit diagram from 2004 and Andy Whitakers PCB formed the basis of what i had made, just much smaller. It is capable of being used for OBDII, just requires the switches, extra K line and the interface.
Instructor
Joined: Jan 2007
Posts: 210
Likes: 1
From: Park City, UT
Want to purchase interface
Nick,
I would like to purchase your interface, but as I just registered yesterday I can't PM you yet. I will keep trying, but if you should read this please PM or email me. I'm in the US.
Thanks,
Doug DuBois
I would like to purchase your interface, but as I just registered yesterday I can't PM you yet. I will keep trying, but if you should read this please PM or email me. I'm in the US.
Thanks,
Doug DuBois
Thread Starter
Rennlist Member
Joined: Oct 2005
Posts: 429
Likes: 45
From: Auckland, New Zealand
Very pleased that it's arrived Ilko. I'm sure you will enjoy playing with it. 
BTW, i'm in New Zealand not Australia. Aussie is about 1500 miles to the west of NZ and somewhat larger. A bit like calling someone from Alabama a Californian!
BTW, i'm in New Zealand not Australia. Aussie is about 1500 miles to the west of NZ and somewhat larger. A bit like calling someone from Alabama a Californian!
