The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
09-03-2012 | 09:19 AM
#2222
Addict
Rennlist Member
Rennlist Member
Joined: Sep 2001
Posts: 565
Likes: 14
Cat + Secondary Muffler + Steering Wheel
Still have some stuff looking for a new home:
cat with O2 sensor (it's separate, not frozen in the bung) $150
secondary muffler 964.111.046.05 , these eventually split if you run with the primary bypass pipe $150
right side trim sail panel, red $30
93 black steering wheel with airbag plus pass side airbag w/o cover, shipping may be an issue - I'm located near Boston and travel to northeast tracks
I'll post some pics tomorrow
cat with O2 sensor (it's separate, not frozen in the bung) $150
secondary muffler 964.111.046.05 , these eventually split if you run with the primary bypass pipe $150
right side trim sail panel, red $30
93 black steering wheel with airbag plus pass side airbag w/o cover, shipping may be an issue - I'm located near Boston and travel to northeast tracks
I'll post some pics tomorrow
Last edited by dave-C2; 09-03-2012 at 01:55 PM.
09-03-2012 | 10:58 PM
#2223
Rennlist Member
Joined: Apr 2006
Posts: 1,229
Likes: 26
From: Indianapolis, IN
FS 964 front bumper cover and 911 hood
White bumper cover. I was going to use this on the rebuild of the 92, but found a nice red one ready to use. There are two cracks on the left side that need to be repaired. There are products to repair and reinforce the cracks on the back side of the bumper. $125
911 Hood - not sure what year it is from. Very slight difference from my 964 frunk in the trunk light, but otherwise appears identical fit to the 964. It had been repainted and I stripped off the repaint with a razor blade and sanded with a DA to clean it up. There was a bit of work to clean up a few bits of road rash, but otherwise straight and in good shape. I was planning to use it on the 92 rebuild, but found a nice red one ready to bolt on. $100
Located in the Indianapolis, IN area.
911 Hood - not sure what year it is from. Very slight difference from my 964 frunk in the trunk light, but otherwise appears identical fit to the 964. It had been repainted and I stripped off the repaint with a razor blade and sanded with a DA to clean it up. There was a bit of work to clean up a few bits of road rash, but otherwise straight and in good shape. I was planning to use it on the 92 rebuild, but found a nice red one ready to bolt on. $100
Located in the Indianapolis, IN area.
09-03-2012 | 11:19 PM
#2224
Race Car
Joined: Jun 2001
Posts: 3,706
Likes: 9
From: Virginia Beach, Va.
WOW, screaming deal for both parts...I'd buy them in a heartbeat if I still owned a tracked 964.
I still have both heat exchangers, the catalytic converter, a primary muffler with a slightly bent outlet (perfect to lop off and weld a custom tip to bypass secondary muffler...).
I also found, in a plastic storage crate EVERYTHING you need for the power steering system, the cam pulley, the pump/pulley, reservoir, hoses and such. The only parts I don't have are the lines that run up forward to the steering rack.
Here's a funny one, I still have a rear wheel bearing in our freezer! I was looking for dinner the other night (which thankfully, due to my Wife I don't have to do too often) and noticed a red box that said, "***" - totally forgot about it, these are the good rear wheel bearings to have, either those or SKF...try and find SKF...I'll ship it to you for $50.
WHY in the freezer? I replaced them every year and would put them in the freezer, slightly head up the trailing arm and then would pop right in.
I've listed several other items I've found in the last few days in previous posts so I won't bore you with those. I'm narrowing down my "collection" of parts but still have more than I thought.
I still have both heat exchangers, the catalytic converter, a primary muffler with a slightly bent outlet (perfect to lop off and weld a custom tip to bypass secondary muffler...).
I also found, in a plastic storage crate EVERYTHING you need for the power steering system, the cam pulley, the pump/pulley, reservoir, hoses and such. The only parts I don't have are the lines that run up forward to the steering rack.
Here's a funny one, I still have a rear wheel bearing in our freezer! I was looking for dinner the other night (which thankfully, due to my Wife I don't have to do too often) and noticed a red box that said, "***" - totally forgot about it, these are the good rear wheel bearings to have, either those or SKF...try and find SKF...I'll ship it to you for $50.
WHY in the freezer? I replaced them every year and would put them in the freezer, slightly head up the trailing arm and then would pop right in.
I've listed several other items I've found in the last few days in previous posts so I won't bore you with those. I'm narrowing down my "collection" of parts but still have more than I thought.
09-08-2012 | 02:22 PM
#2226
Rennlist Member
Joined: Dec 2004
Posts: 1,138
Likes: 2
From: Doncaster, England
Turbo owners and those with turbo brakes.
ages ago I bout some EBC yellow stuff and EBC Red stuff pads. Tried to fit them today and guess what wrong ones
searching around the internet it appears they are for the turbo.
At least one site lists them as for the turbo and C4 so it seems whoever sold me these was missled by EBC. Please double check they are the right part for your car. part numbers list below with pics
anyway they are no use to me. these seem to be around £100 new per set.
£55 each including shipping to the UK
Red stuff DP3767
yellow stuff DP4767
ages ago I bout some EBC yellow stuff and EBC Red stuff pads. Tried to fit them today and guess what wrong ones
searching around the internet it appears they are for the turbo.At least one site lists them as for the turbo and C4 so it seems whoever sold me these was missled by EBC. Please double check they are the right part for your car. part numbers list below with pics
anyway they are no use to me. these seem to be around £100 new per set.
£55 each including shipping to the UK
Red stuff DP3767
yellow stuff DP4767
09-08-2012 | 03:01 PM
#2227
Three Wheelin'
Joined: Jun 2006
Posts: 1,983
Likes: 0
From: Raleigh, NC
09-09-2012 | 04:29 PM
#2230
Pro
Joined: Aug 2009
Posts: 554
Likes: 0
From: Baltimore
Eibach Pro kit / linear #450 rear springs.
Possibly eibach pro kit. The fronts are definitely Eibach's but the rears look like linear springs and have #450 rating on them. They have 30k miles on them and my car rode great with the 22 year old Boge shocks. The rear of the car was in the middle of the adjustment threads and it was plenty low in the rear ( check avatar ) $165 shipped in the CON US.
Last edited by Cosmos99; 09-09-2012 at 10:48 PM.
09-11-2012 | 06:12 PM
#2231
Drifting
Joined: Sep 2010
Posts: 2,591
Likes: 18
From: Philly 'burbs
*SOLD* Chrome H4 headlight rings - New, never installed
(2) 911-631-933-01 Chrome rings for the H4s
$160 for the pair shipped in the lower 48 states. $150 + actual shipping costs elsewhere
$160 for the pair shipped in the lower 48 states. $150 + actual shipping costs elsewhere
Last edited by Laker; 10-25-2012 at 06:55 PM. Reason: Sold
09-12-2012 | 07:05 AM
#2232
Three Wheelin'
Joined: Apr 2012
Posts: 1,286
Likes: 1
From: Putney, London
WANTED: 964 Rear Indicators - Bad condition but working
Hi,
As above want the rear indicator light pods, EU spec. Don't care how badly crazed/cracked or faded these are, just need them to passt he MOT as mine have the red film over them and not sure they would pass.
Jack
As above want the rear indicator light pods, EU spec. Don't care how badly crazed/cracked or faded these are, just need them to passt he MOT as mine have the red film over them and not sure they would pass.
Jack
