onefstm

More pictures.

Jeff Curtis

If Jeremy (onefstm) sells his factory 964 heat exchangers (headers) don't get your panties in a wad, I have a set I'd like to offer for the same price as well, shipping should be in the same ballpark.

ALSO, I listed it awhile back and thought it was sold but the member had to back out of the sale, citing the "wife card". I have a 964 ECU with a conservative Autothority chipset in it. It is designed for a performance exchaust (whether primary, seconday or BOTH bypasses and NO cat (Euro "pre-muffler resonator OK) and works well with the lightweight flywheel but it's not required that you have one.

$525 shipped.

I also just found a set of factory trailing arms (w/out hubs) but has the camber adjustment plates (factory) still attached...would like $100 each plus shipping on those.

If you need pictures of the above parts/pieces, you have issues. :P

PM if interested, I don't have much in the way of 964 parts left but I do find something every now and then in a crate/container.

sc

Looking to replace my weathered and cracked taillights and center reflector. If you have a set in excellent condition please let me know.

Also, electric aero mirrors to change out the flags on mine.

Thanks!

Shamus964

I've got a new (in box) center reflector and passenger side taillight - pm sent

BigMikeATL

Anyone have a right side rocker panel in Guards Red?

dave-C2

I've got a R side sail panel in G Red if that will help.

1990C2CAB

I HAVE FOR SALE A G50-05 5 SPEED FROM A 1992 C2 CAB WITH ONLY 62,854 MILES. PRICE IS 4500.00 FOR JUST THE TRANSMISSION, OR 5700.00 FOR A COMPLETE CONVERSION PACKAGE FOR A TIPTRONIC CAR.

THE TRANSMISSION WAS TESTED PRIOR TO REMOVAL, & IS IN EXCELLENT WORKING CONDITION, AS YOU WOULD EXPECT FROM A 62K MILE CAR. THIS CAR SPENT MOST OF ITS LIFE IN TEXAS & CALIFORNIA. I AM A MASTER CERTIFIED TECHNICIAN AT A CENTRAL KANSAS MERCEDES/PORSCHE DEALERSHIP. THE FLUID LOOKED NEW WHEN REMOVED, & THE DRAIN PLUG WAS CLEAR OF ANY DEBRIS.

4500.00 GETS YOU THE TRANSMISSION
5700.00 GETS YOU THE TRANS, DUAL MASS FLYWHEEL, CRANK SENSOR BRACKET FOR THE G50 THAT ATTACHES TO THE ENGINE, 5 SPEED STARTER, ALL ATTACHING BOLTS, SLAVE & MASTER CYLINDERS, FLOORBOARD BY PEDALS, PEDAL ASSEMBLY, NICE SHIFTER & SHIFTER BOOT, SHIFTER ASSEMBLY & LINKAGE, INSERT FOR CONSOLE, 5 SPEED THROTTLE BODY & SWITCHES NEEDED FOR THE 5 SPEED, & A DME FROM THE SAME CAR.

IF THE TRANSMISSION IS SOLD BY ITSELF, THE CONVERSION PACKAGE WILL STILL BE AVAILABLE. I HAVE NO IDEA HOW TO PM ON RENNLIST, SO IF YOU TRY & DON'T GET A RESPONSE, POST A REPLY. ALSO, IT MAY TAKE A DAY OR SO TO GET A REPLY FROM ME. PARTS ARE LOCATED IN WICHITA, KANSAS, & WERE REMOVED FROM THE CAR IN JUNE 2012, & ARE IN INSIDE STORAGE.

LAST, I WILL POST PICTURES TOMORROW.

sc

Hey guys! Here is a wish list for me. Some may be a long shot but you never know.

-Cup 1 Wheels (Will trade my Cup IIs as option)
-Aero Mirrors (Auto)
-Leather 340mm Steering Wheel w/airbag
-Guage rings (aluminum/brushed)
-Charcoal Sport Seats
-Cup pipe
-RS Door Panels (Charcoal or Black)
-SRP Pedals (Manual)
-Strut bar
-Rear C2 swaybar
-Clean no blem rear view mirror
-Front C4 swaybar links
-AP Design or similar front bumper air ducts
-Replacement Defrost button for CCU
-Indoor/Outdoor car cover

I also have the following to offer:

-Rear taillights and center reflector with usual wear and internal cracking from 1990. Otherwise no external blems and lights all work.

-OEM C4 Suspension take offs struts/springs. 69K miles

dave-C2

SC
I have a stock black leather steering wheel from a 93 964.
PM me if interested, I'm motivated part with it.

G500

I've got rear left and right turn signals and centre reflector off a 90 in good condition that I am willing to part with. PM me if interested. Can send pics on request of any angle.

dkcaims

WTB: Complete intake/induction system -- Aluminum or Plastic.

Let me know what you might have and what's included.


I'm quicker to respond to PM's.

Thanks

UPDATE:
Aluminum intake purchased and on the way to me.
Thanks to Andrew M. in Calgary.
Will have it flow tested and honed if needed.

Shtootgart

WTB:Split deck lid from 993 C2S. Preferably black PM please

LouZ

This is a 964 site... you would have better luck on the 993 site.

Mr.Alex

Purschased.

Goughary

hey alex - I am looking to buy a primary bypass...so if I do that and you havent found one yet, I'll be happy to sell you my primary...I'm outside NYC so it'd be easy enough...