The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#2373
Intermediate
I need a Seat Control Module Unit for a 2002 Boxster. I think they're pretty interchangeable with similar years as well as the 911.
The official part number is 99661853703
If anyone knows of a part out or someone who might have one, please contact me. Thanks.
mbgt72@gmail.com
The official part number is 99661853703
If anyone knows of a part out or someone who might have one, please contact me. Thanks.
mbgt72@gmail.com
#2375
Kinesis 17" wheels - 8's and 9.5's
For sale is a set of three piece Kinesis wheels. - $1,600 shipped in the U.S.
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
#2376
For sale is a set of three piece Kinesis wheels. - $1,600 shipped in the U.S.
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
#2377
New price - $1,500 shipped. Thanks!
For sale is a set of three piece Kinesis wheels. - $1,500 shipped in the U.S.
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
Front are 17x8 - approximate offset et40
Rears are 17x9.5 - approximate offset et50
These spin straight and are in very good shape overall. If you removed the center, polished the lips, and painted the center, they would look amazing. I love these wheels. They are some of my favorite wheels on a 993.
Based on my calculations, they would work on a 993 with a 5-10mm spacer on the front. On the rear, it would work fine as long as you used a 265 or 275 tire. The rear would sit out 9mm more than a 18x10et65
On a 964, you would probably need the same spacer on the front. On the rear, it should be a direct bolt-up. However, you could space it out 5-10m if you wanted to bring it to the edge of the fender.
Thanks
#2380
Rennlist Member
I have the following from my '93 RS America:
964 Spoiler Control Module. 964.618.212.00
As removed from '93 964, VGC. $160 inc shipping to the conus
964/993 Airbag Control Unit, under dash. Removed from '93 RS America. $375 inc.. shipping to the conus
Complete working HVAC Suitcase, Blower Motor Assembly removed from '93 RS America without A/C, so evaporator is not included but all the plumbing is there. Wiring harnesses uncut and complete.$625 inc shipping to the conus.
964 Passenger Side Airbag, perfect condition undeployed. $175 inc.... shipping tho the conus.
964 Rear Bumper Support Bracket New. $25 inc... shipping to the conus
PM or email jfawsitt9@yahoo.com
964 Spoiler Control Module. 964.618.212.00
As removed from '93 964, VGC. $160 inc shipping to the conus
964/993 Airbag Control Unit, under dash. Removed from '93 RS America. $375 inc.. shipping to the conus
Complete working HVAC Suitcase, Blower Motor Assembly removed from '93 RS America without A/C, so evaporator is not included but all the plumbing is there. Wiring harnesses uncut and complete.$625 inc shipping to the conus.
964 Passenger Side Airbag, perfect condition undeployed. $175 inc.... shipping tho the conus.
964 Rear Bumper Support Bracket New. $25 inc... shipping to the conus
PM or email jfawsitt9@yahoo.com
#2383
I would be extremely interested in purchasing a heat bypass tube for my 964. Anyone have one they would like to part with?
Other items I wouldn't might having either:
- Momo Mod 7 steering wheel
- RS door panels (black)
Other items I wouldn't might having either:
- Momo Mod 7 steering wheel
- RS door panels (black)
Last edited by Pkblu; 06-24-2013 at 10:53 AM. Reason: added additional items
#2384
I screwed up and somehow overpaid and ended up with some brand new oil lines for my 964 which it turns out I didn't need. These have never left my living room and have end caps still on the line...BRAND SPANKING NEW
Oil Hose, Bottom of Oil Tank to Top of Oil Thermostat (Fits late 964 or 993's too)
964-207-241-06-M120 - $15
Oil Line, Left Side of Oil Thermostat to Front Oil Cooler
964-207-133-04-M20 - $200
Oil Line, Right Side Of Oil Thermostat To Front Oil Cooler
964-207-135-04-M20 - $225
Mark
Oil Hose, Bottom of Oil Tank to Top of Oil Thermostat (Fits late 964 or 993's too)
964-207-241-06-M120 - $15
Oil Line, Left Side of Oil Thermostat to Front Oil Cooler
964-207-133-04-M20 - $200
Oil Line, Right Side Of Oil Thermostat To Front Oil Cooler
964-207-135-04-M20 - $225
Mark