onefstm

I have a few items from my old 964 that I would like to sell cheap.

964 Catalytic Converter $100 obo
964 Heat Exchangers $100

Thanks

swmic

Anyone need a nice stock air filter box? $100 + shipping. I just put new large clips on it. The filter is also new. PM me.

SOLD

Rocket Rob

swmic - I'll take it. PM sent

ClaytoVR

swmic- I'll be second in line for this please

Marc Shaw

All parts are in US$ as listed. PayPal only and PayPal fees (3%) for any item(s) over $100.

Buyer pays for shipping, any duty, and taxes. I don't make money on shipping and usually round down so please don't ask me to take a loss by shipping for free.

First buyer who sends me a PM (not posts in this thread) and commits to buy (not ask a question, express interest, request a shipping quote, etc) gets it.

I have a day job but I'll ship as soon as I can, usually by Expedited Post Office, insured and with a tracking number. I can claim things are gifts but cannot insure them for more than the expressed value. I'll try to combine any items to reduce shipping, if possible.

Fitment is the responsibility of the buyer - I'll try to help but I may be wrong. I guarantee that all items are accurately represented. No returns/refunds unless item was grossly misrepresented or DOA so please be sure the item fits and fits your needs.

Items that are sold have been deleted.



Tools:

PulleyBoys M90 pulley puller & installation tool
New, unused
http://s377.photobucket.com/albums/o...lley%20puller/
New $150
Asking $75


Miscellaneous:

Tekonsha 3040-P wiring adapter for brake controllers (Toyota and Lexus)
New, unused
http://s377.photobucket.com/albums/o...ake%20adapter/
New $15
Asking $10

Thermo-Flex insulation, 1" diameter
New, unused
3' lengths, 2 available
http://s377.photobucket.com/albums/o...e/Thermo-flex/
New $20 each
Asking $10 each

Thermo-Flex insulation, 1" diameter
New, unused
10' length
http://s377.photobucket.com/albums/o...e/Thermo-flex/
New $62
Asking $30


993 Parts:

ISV line, p/n 993.110.589.02
New, unused, 2 available
http://s377.photobucket.com/albums/o...%20ISV%20line/
New $30 each
Asking $15 each


Misc Parts:

Boxster third/centre radiator bumper retainer, p/n 986.505.555.00
New, unused
http://s377.photobucket.com/albums/o...er%20retainer/
New $108
Askng $60

Boxster third/centre radiator upper bracket, p/n 996.504.487.02
New, unused
http://s377.photobucket.com/albums/o...tor%20bracket/
New $78
Asking $40

Boxster third/centre radiator air guide, p/n 996.575.141.02
http://s377.photobucket.com/albums/o...20air%20guide/
New $82
Asking $40

Boxster third/centre radiator kit (everything needed except lower bracket and hoses)
All new, unused
Includes radiator (996.106.037.51), air guide (996.575.141.02), bumper retainer (986.505.555.00), trim piece (986.505.551.00)
upper bracket (996.575.141.02) and 4 bumpers/spacers (930.113.430.00)
http://s377.photobucket.com/albums/o...adiator%20kit/
New $632 total
Asking $300

MOMO hub, standard 6-bolt spacing
Used, good shape
http://s377.photobucket.com/albums/o...%20used%20hub/
New $76
Used $40

Tekniq 350 mm black leather steering wheel
Used, good shape
http://s377.photobucket.com/albums/o...ekniq%20wheel/
New $240
Asking $80

Recaro universal steel side mounts (1 pair for 1 seat)
New, unused
http://s377.photobucket.com/albums/o...side%20mounts/
New $110
Used $60

Bosch Cobra water pump
New, unused
http://s377.photobucket.com/albums/o.../Bosch%20pump/
New $120
Asking $50

Hella water pump
New, unused
http://s377.photobucket.com/albums/o...water%20pumps/
New $60
Asking $30

Engine air duct cover, p/n 930.106.403.00
New, unused
http://s377.photobucket.com/albums/o...e/Fan%20cover/
New $60
Asking $30

H1/H1 headlight lens glass surround rubbers, p/n 911.631.967.00
New, unused (pair, 2 rubbers)
http://s377.photobucket.com/albums/o...ght%20rubbers/
New $40/pr
Asking $15/pr


964 Parts:

Steve Wong chip, stock except for LWF fix
New, unused
http://s377.photobucket.com/albums/o...%20LWF%20chip/
New $375
Asking $250

Stock DME w/chip, p/n 964.618.124.00
Used, works perfectly
http://s377.photobucket.com/albums/o...or%20Sale/DME/
New $2740
Asking $350

9M Sport mechanical camshafts (compatible with stock pistons)
New, unused
http://s377.photobucket.com/albums/o...ale/9M%20cams/
Asking $1000

Fuel line, p/n 964.110.413.00
New, unused
http://s377.photobucket.com/albums/o...e/Fuel%20line/
New $69
Asking $35

Rear bumper heat shield, p/n 964.505.073.01
New, unused
http://s377.photobucket.com/albums/o...heat%20shield/
New $342
Asking $160

Air intake boot, p/n 964.110.366.00
New, unused
http://s377.photobucket.com/albums/o...intake%20boot/
New $205
Asking $100

CF rear (engine bay) fuse box & cover (cover has 4 small holes in it & small scratches)(glossy clear coat showing weave)
Used, decent shape
http://s377.photobucket.com/albums/o...%20fuse%20box/
New $485
Asking $150

C2 ABS brain (does not work on C4), p/n 964.618.119.00
Used, working perfectly
http://s377.photobucket.com/albums/o...Sale/C2%20ABS/
New $4900
Asking $350

C2 transmission mount parts (do not work on C4), p/n 999.025.074.02 & 900.074.063.02 & 993.375.055.70
New, unused
http://s377.photobucket.com/albums/o...trans%20mount/
New $120 total
Asking $60

Fuel pump cover, p/n 964.504.231.00
New, unused
http://s377.photobucket.com/albums/o...0pump%20cover/
New $50
Asking $30

Oil line, p/n 964.207.241.04
New, unused
http://s377.photobucket.com/albums/o...le/Oil%20line/
New $15
Asking $10

Oil cooler cover, p/n 964.575.522.00
New, unused
http://s377.photobucket.com/albums/o...20air%20cover/
New $58
Asking $30

Oil cooler deflector, p/n 964.207.223.01
New, unused (but does have small crack - see photo)
http://s377.photobucket.com/albums/o...%20air%20duct/
New $48
Asking $20

Rear bumper heat deflectors, pair p/n 964.505.081.01 & 964.505.082.01
New, unused
http://s377.photobucket.com/albums/o...20heatshields/
New $150 each
Asking $150 pair or $80 each

Rear tail-light heat shields, pair p/n 964.505.514.00 & 964.505.513.00
New, unused
http://s377.photobucket.com/albums/o...eat%20shields/
New $100 each
Asking $80 pair or $50 each

Tachometer, face professionally refinished (by NH Speedo) to 7200 redline, p/n 964.641.301.00
Used, great shape
http://s377.photobucket.com/albums/o...r%20Sale/Tach/
New $650
Asking $300

Shark fins, pair, p/n 964.559.096.01 & 964.559.095.01
New, unused (factory primer)
http://s377.photobucket.com/albums/o.../Shark%20fins/
New $380 pair
Asking $200 pair

CF/Kevlar rear deck lid, matte finish ready for paint (not clear coat gloss showing weave)
New, unused
http://s377.photobucket.com/albums/o...%20deck%20lid/
New $850
Asking $500

CF/Kevlar rear bumper bar, FVD p/n 505.021.00
New, unused
http://s377.photobucket.com/albums/o...rear%20bumper/
New $1060
Asking $500

Carrera 2 RSA manual steering rack, p/n 964.347.011.02
New, unused (NOS, not a rebuild)
http://s377.photobucket.com/albums/o...eering%20rack/
New $1800
Asking $1200

Electric window lifts, both driver & passenger sides, p/n 911.542.935.46 & 911.542.936.46
Used, work perfectly
http://s377.photobucket.com/albums/o...indow%20lifts/
New $760 pr
Asking $300 pr or $175 each

Electric window motors, both driver & passenger sides, p/n 911.624.015.43 & 911.624.014.43
Used, work perfectly
http://s377.photobucket.com/albums/o...ndow%20motors/
New $128 (left) & $260 (right)
Asking $150 pair or $80 each

Jeff Curtis

WOW, that's quite a list of parts FOR SALE there Marc!

That reminds me, I found another crate full of small parts I took pics of the other night and will be listing several items here shortly.

Meanwhile, I also discovered that I own THREE heat exchangers, that means I have 1.5 sets! Anyone wants one or both, drop me a line. I'll have to re-edumakate myself as to which ones are right and left - $100 each.



Here is the original catalytic converter/O2 sensor I removed from my 964, shortly after purchase. I have all of the heat shield pieces as well. $100



I still have a factory ECU that I'll sell with factory chip or with the Autothority chip that's in it at the moment, setup for LWF (you don't have to have a LWF to use the chip, just an option) and performance exhaust, it's a very conservative burn that adds 10-12hp. - $500



I also dusted off a 16" spare, out of a 964 Turbo, designed to fit over BIG Red calipers - $150, it's 34lbs boxed up, ready to ship.



Front compartment plastics. If I recall these pieces are all the way up front and kind of hide the jack? Great condition - $25



Slightly used AC condenser bracket. I had replaced this with a NEW bracket after an accident but never remounted the condenser on it...you can still see the stickers. I completely removed AC components shortly thereafter. This mounts opposite the oil cooler, left side. - $35



High and Low pitch horns, with factory bracket, removed from my 964, working condition - $50

I also have a separate low pitch horn I bought because I thought one was bad, turned out it was a relay. $25




Buyer pays shipping, I only charge actual shipping when possible and package all of my items using "recycled" boxes/packaging. I am quite adept at shipping and like to use Fedex Ground as, to date, they remain the most reliable and cost effective route.

All items for sale are in good to great condition, unless otherwise noted...all parts are usable. Parts were either removed from my 1991 964 or purchased as spares for racing/repairs, etc.

***I am open to reasonable offers, especially if you'd like multiple items. If I'm "way off base" from what you think is reasonable, feel free to contact me to discuss, I'm easy...I just need room for more Cayman parts!! ...and 944T stuff as well, please don't ask WHY. Haha.

Jeff Curtis

Here are a few more items, I'll be adding pics and items to this post as I go through them.

Interior "push" lights - $15



Lower dashboard, complete with brackets/hardware, glove box insert, door, latch, etc. - $175





Someone on here said this was a cruise control "brain"? Comes with floor pan intact, this mounts in factory position underneath passenger seat and is also where the factory amplifier and alarm/ignition lock out module is.
Please feel free to correct me (via PM) if you think I am in error with regards to the blue module in the pic. - $50



Windshield Washer Bottle - $25
You know you need one.



Collapsible Oil Drain Tube, I bought two but only changed out the one nearest the large oil line at the bottom of the crankcase. If you need to change that line out or merely tighten it in the hopes that it'll stop a leak at that fitting, you will likely have to remove the factory non-collapsible unit and use this trick two-piece aluminum unit, this one is new, still packaged - $38 (they're $48 from the supplier).



Power Steering Components. I believe this to be the most complete (but not installed) power steering setup for a 964 in all the land. You get the pump, mounting bracket, pulley, hardware, plastic guard, fluid reservoir and a fairly new belt. I would prefer to sell the whole shebang. - $150




Buyer pays shipping, all items working/great condition when removed from my 1991 964.
I take Paypal and most other forms of payment...help me clear out my extra parts this Winter!!

***UPDATE 11/26/12 - Lower dash panel/hardware/glove box parts have been tentatively claimed...also, updated (lowered) price on oil return tube so it's a "bargain" - they're $48, I'll go $38 plus shipping (padded envelope will suffice).

Jeff Curtis

Adding a few more items for today, have had some interest and will remove pics/descriptions as parts sell/committed to.

Right Rear Bumper Corner, tabs for heat shield intact, tailpipe outlet has typical "melted" section. I usually cut around the opening for larger tailpipes, perfect for upgraded exhaust conversion and/or track car. - $60




Aluminum Battery Tray - designed for Optima Dry Cell Batteries, also use to mount other types by drilling appropriate hole(s). This unit slides right under factory battery tab in front compartment and has hole for hold down bolt. Works like a champ, used it for several years. - $35


Left and Right Front Fender Liners. Factory units in decent/usable condition, some tire rub wear in common area. Your front factory fender liners are comprised of two pieces per side, both of these are the forward pieces. - $25 each.

LEFT (Driver's Side) is SOLD!!



Front Fender Well Block Off Plate, right side. Held on by two screws - $5


Transmission Undertray, Plastic. This is the most forward section of the undertray. Even if you remove the engine undertray, you want to keep this piece in place...it actually provides nice underbody aero and my transmission temps ran noticeably cooler with it installed. I have knocked the "ears" off this one for easier install/removal on a track car. It does not affect the mounting. - $25


PM or email if interested...again, if you think I'm "way off base" with respect to asking price, I'm open to negotiation, contact me via email or PM...it's easier for me to email.

jefcATmindspringDOTcom - remove "AT" and "DOT", replace with appropriate characters.

Twood

Jeff
Do you and Marc live in large warehouses?
Where do you guys find room to store this stuff and its only the things you want to get rid of not the really good stuff you want to keep?

Jeff Curtis

Haha, I think Marc may have me beat for "AWESOME" parts, I'm just going through years worth of parts I've stored for my 964 racing effort. I've also bought out friend's projects, racing parts, safety gear, etc. I still have tons of racing seat brackets, harness parts, seat back braces...it's crazy.

To answer the warehouse question, it was crazy, I moved from a 1600sq. ft. house with a PACKED attic and 12 x 12 storage shed on the side and fit ALL of my spare parts in the loft of a 32 x 30, 2 level "shop" that was built behind our new house. I never really organized anything but thankfully did build some large warehouse style shelving with a nail gun and materials "borrowed" from other build sites.
(seriously, friends with the builder and construction crew, I had full run of this neighborhood until other houses came about). I'm almost at capacity and have changed course a bit with buying and finishing a Cayman S "ITC" build and have taken to working on other people's project cars as well. About half the parts I store aren't even mine anymore!

hawk911

looking for a spare front bumper... must be in really good to excellent condition

sc

Howdy RLers!

I posted a wish list a couple months back and here is an update of what's still outstanding.

-Replacement Defrost button for CCU
-Cup pipe
-Sport Cat
-SRP Pedals (Manual)
-Strut bar
-Rear black seats
-Wong chip 91 Octane
-Front passenger airbag cover (black)
-Indoor/Outdoor car cover

I also have the following to offer:

-Rear center reflector with usual wear and internal cracking from a 1990 car. Otherwise no external blems and lights all work.
-OEM C4 Suspension take offs struts/springs. 69K miles
-Good condition rear view mirror
-Flag auto mirrors (silver)
-Cup II wheels 17" (Good condition w/Dunlop tires)

Jeff Curtis

Hey guys, just spent the last hour helping a friend with a 1990 C4, his passenger window became dislodged and his Fiance kept hitting the electric window button up and down, which in turn bent up the mechanism.

For any of you that have stripped out your doors for a track car, etc. I'd like to get him a passenger window with the bottom metal piece still crimped on (his was rusted and appears to have lost it's crimp/clamping force) and maybe the "X" (scissors) mechanism as his is now bent up a bit.

What caused this is the center rail of the window frame was not installed properly after getting the car repainted a few years ago. I have some pieces to order for that as well.

UGH.

If any of you have a passenger door window with the crimped piece still intact, we need that at a minimum. Thanks!

Marc Shaw

You can buy the part that crimps onto the window with the rubber insert separately (I replaced my rusty one a few years ago) and re-use the same glass (use dishwashing liquid to the the new crimped bit/rubber on).

I have electric x-arms (lifts) for sale.....

Marc

Smesh

Hey guys. I don't want to drill mine. I want to keep it stock and get a backup. Anyone have an old air box cover that I can drill or an already drilled or open one I can buy off them? I'm in Sherman Oaks, California.

Thanks!

Oh, I'm also looking for a switch plate on the console. The one that holds the hazard, Central Lock and Alert switches.