The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#2086
OK boys, here's a few more items I've uncovered during my "attic adventures":
BIG Red setup, 993 TT calipers, brand new...think they were installed for a mock-up years ago, never used...removed a couple years ago from a project car I STILL HAVE
I have the adapters and allen bolts if you need those as well, I'll toss them into the deal, will allow you to run 964 Turbo front rotors or I can have them machined (-5.2mm) so you can run the two-piece 993TT rotors, only about $40 more for a pair of those.
SO, I'm offering the BIG Red calipers, as a pair, with adapters and allen bolts (worth another $200) and I have a receipt for the calipers from Suncoast for $386 each...make me a fair offer.
BIG Red setup, 993 TT calipers, brand new...think they were installed for a mock-up years ago, never used...removed a couple years ago from a project car I STILL HAVE
I have the adapters and allen bolts if you need those as well, I'll toss them into the deal, will allow you to run 964 Turbo front rotors or I can have them machined (-5.2mm) so you can run the two-piece 993TT rotors, only about $40 more for a pair of those.
SO, I'm offering the BIG Red calipers, as a pair, with adapters and allen bolts (worth another $200) and I have a receipt for the calipers from Suncoast for $386 each...make me a fair offer.
#2087
Here's another item I had "hiding" in a bin, a Guard Transmission "G50" Torque Biasing Differential. Perfect for street/Autocross, and light track duty.
You can read up on them HERE: http://www.guardtransmission.com/diff_TBD.html
I think they're about $1,200 new, this one was run for a year or so...again, make me a fair offer and please consider there is over $200 worth of bearings and stub axles for a G50 gearbox included...some shims for backlash spacing as well. Also includes the 3 pins for the speed sensor plate...of which I believe is only used for 968?
The "G50" model fits '00-'04 Boxster "S", 968, GT2, GT3, 993, 996 (+ Turbos!) and of course, 964 gearboxes.
You can read up on them HERE: http://www.guardtransmission.com/diff_TBD.html
I think they're about $1,200 new, this one was run for a year or so...again, make me a fair offer and please consider there is over $200 worth of bearings and stub axles for a G50 gearbox included...some shims for backlash spacing as well. Also includes the 3 pins for the speed sensor plate...of which I believe is only used for 968?
The "G50" model fits '00-'04 Boxster "S", 968, GT2, GT3, 993, 996 (+ Turbos!) and of course, 964 gearboxes.
#2088
WTB - Tunnel Side Seat Belt Anchor
I am fitting a set of Cobra Monaco S race seats to the 964. The seats are base mounted - not with side mounts
To do this I need a set of Tunnel Side Seat Belt Anchor - I have looked at the Brey Krause R-9005 Tunnel Side Seat Belt Anchor - see link
http://www.bkauto.com/porsche/r9005.php
Any suggestions on what seat belt anchors are appreciated or if someone has a set to sell please let me know
thanks
To do this I need a set of Tunnel Side Seat Belt Anchor - I have looked at the Brey Krause R-9005 Tunnel Side Seat Belt Anchor - see link
http://www.bkauto.com/porsche/r9005.php
Any suggestions on what seat belt anchors are appreciated or if someone has a set to sell please let me know
thanks
#2090
SOLD Just got these today in trade for a 993 roller that I am parting. SOLD
Bilstein HD's and H&R red springs for a late model 964. Double check your fitment with the pictured part number please.
These appear to very very near new. Also, the springs are the listed for a 964 turbo (965) but work great on either turbo or non-turbo. They are only slightly stiffer in the rear. Perches and locking rings are also included.
SOLD plus shipping. Shipping should be $45 in the US. They are fully boxed and could go out tomorrow.
Bilstein HD's and H&R red springs for a late model 964. Double check your fitment with the pictured part number please.
These appear to very very near new. Also, the springs are the listed for a 964 turbo (965) but work great on either turbo or non-turbo. They are only slightly stiffer in the rear. Perches and locking rings are also included.
SOLD plus shipping. Shipping should be $45 in the US. They are fully boxed and could go out tomorrow.
Last edited by onefstm; 02-27-2012 at 12:27 PM.
#2095
Dang Jeff don't belong on no air-cooled forums no mo.
I know it seems I'm more into selling off my "stock" but I still love the 964 platform and have been helping several people via PM et al...so I'm still "here".
As far as the water pumper, I swear that's not what I smell when I come in off the track, some kind of funky anti-freeze. I have to admit I have yet to even remove the engine cover because the P.O. had JUST had it serviced at the local race shop, all fluids, brakes bled, etc. Instead I spent more time figuring out a right front shock leak (after almost spinning twice) and getting a decent setup on it before knocking out some respectable times.
I thought I was going to pull my hair out at one point, but got it going pretty well.
Then...then, a race in FREEZING RAIN on Sunday...
#2098
Guys, the Guard TBD and BIG Reds are still available...I'm looking to get $800 for the TBD/bearings/shims/stub axles and $700 for the calipers if you want the adapters/allen bolts it's another $100, I have a set of Hawk HPS pads that were on the car for maybe 3 days I'll throw in for another $100...they're "like new" and are excellent "spirited" street pads and work great at the track as well.
FYI, the flat square seat bracket I had posted a few up from here has been sold!
Stay tuned for more good stuff, I'm nowhere near the end.
FWIW, had several interested in the 17" Fikses I had listed previously but no commitments. Many wanted to know offsets, and I was too busy/lazy to figure it out as it's been years since I worried about offsets - THEY FIT A 964!! ...they are 17" x 8" and 9" and fit a 245/45/17 and 285 series tire easily, I ran a 275 series rear as it is a very popular Hoosier Race Radial size. - I'd like to get $1,800 for the set of four, you can have the Hoosier R6 "Rain" tires that are on them as well.
I still have the rear bumper pieces, the tailpipe sections are pretty much in "track" condition with the outline of the tailpipe carved out for larger tailpipe and due to the propensity of the bumper cover touching the tailpipe...and I still have the white rocker/sail panel, along with the red sail panel. Pretty much, a $50 offer is the magic number...if you just need one sail panel, $25, etc.
FYI, the flat square seat bracket I had posted a few up from here has been sold!
Stay tuned for more good stuff, I'm nowhere near the end.
FWIW, had several interested in the 17" Fikses I had listed previously but no commitments. Many wanted to know offsets, and I was too busy/lazy to figure it out as it's been years since I worried about offsets - THEY FIT A 964!! ...they are 17" x 8" and 9" and fit a 245/45/17 and 285 series tire easily, I ran a 275 series rear as it is a very popular Hoosier Race Radial size. - I'd like to get $1,800 for the set of four, you can have the Hoosier R6 "Rain" tires that are on them as well.
I still have the rear bumper pieces, the tailpipe sections are pretty much in "track" condition with the outline of the tailpipe carved out for larger tailpipe and due to the propensity of the bumper cover touching the tailpipe...and I still have the white rocker/sail panel, along with the red sail panel. Pretty much, a $50 offer is the magic number...if you just need one sail panel, $25, etc.
Last edited by Jeff Curtis; 02-28-2012 at 08:46 PM.
#2099
A long shot, but need to ask -
Does anyone have a 9" Cup I rim available? Any suggestions as to where to find one? I'll buy a pair if that is the only option.
Here are the specs:
9J x 17 ET 55
965.362.128.00
Prefer Porsche original and round(ish)
Does anyone have a 9" Cup I rim available? Any suggestions as to where to find one? I'll buy a pair if that is the only option.
Here are the specs:
9J x 17 ET 55
965.362.128.00
Prefer Porsche original and round(ish)
#2100