993 ignition coils in Place....wowww
09-24-2019, 08:47 PM
#16
My original coils failed and replaced them with the silver Bosch units- One of which promptly failed in less than three months... i’ll be using a 993 units for this reason alone.
Pete
Pete
09-28-2019, 09:59 PM
#17
If you just lay all parts (bracket, coils pack, etc) on the bench you will find out easily the best way to mount the 993 pack,
I used a 8mm drill to drill two holes so the coil will fit the black bracket and front bracket (coper colored one) will connect the coil on the left side.
I used a little lock tide to secure the nuts.
Tip, put some tape om the position you need to drill to prevent 'skitting', first dril with e.g. 3mm drill a hole before using the 8mm.
I used a 8mm drill to drill two holes so the coil will fit the black bracket and front bracket (coper colored one) will connect the coil on the left side.
I used a little lock tide to secure the nuts.
Tip, put some tape om the position you need to drill to prevent 'skitting', first dril with e.g. 3mm drill a hole before using the 8mm.