When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What is the best starter for our cars? I have had issues with both of my stock Bosch units and would like to try something new. Please let me know if other owners have had better luck with a different brand of starter.
The problem that I am having is that about every 6 or so times I start the car I end up getting a slight hesitation and then the car turns over. I have checked the battery and terminals and everything checks out fine. I even checked the ring gear to see if it was possibly the cause.
I have the same Bosch starter on my 87 951 and it has never given me this type of problem. I am still checking some things trying to diagnose the problem.
Also. I did look at that IMI starter and would consider it if it truly helps.
Once in a blue moon I'll get starter kick back, even with the sleeve and no slots. Had no idea what it was for a while, and didn't happen enough to warrant worry.
.
Great to hear! Did you install new bracket in car or with motor out and how hard was the install and sensor gaping?
-Wayne
Engine in car, but I had the intake off. The hardest part was loosening up the socket head bolts - I believe I had success using three extensions from under the car along the bellhousing. I replaced these bolts with standard hex-head type on reassembly.
Gaping wasn't a problem using a thin washer temporarily glued to the sensor. It is pretty tight in there though, and I was almost certainly swearing.
.
Great to hear! Did you install new bracket in car or with motor out and how hard was the install and sensor gaping?
-Wayne
Turn the motor to tdc and install the sensor with the washer to set the gap, tighten down the bracket applying light pressure to bracket preventing it from moving away. Remove washer from the sensor. Probably wise to replace both sensors while your in there since they are a know weak point on our cars. Much easier to do with the intake removed.