Speed Metal 951

Dropped the stock exhaust and WG today. Looks like im going to drop some weight! That stuff was heavy, especially the WG and associated brackets.
The new is 3" SS , Magnaflow muffler and a Turbosmart WG vented to atmosphere(At least initially! Lets see if I hate it.. If I do, I will retrofit)
Its half done, pics to follow.

Paulyy

Note:

The wastegate has a better sound with no pipe coming out of it.
With a pipe it sounds deeper and no "scream" you want the scream.

Kris H

I have unmuffled screamer pipe on my car and I love the n-group-ish sound with the WG open. However be advised - It is VERY loud, and I must admit - unless it's on car that at first glance is obviously a TD/DE car - must seem ridiculous and borderline ricey.

Paulyy

It is ****** spec IMO "douchbag" in your term

V2Rocket

OP, where are you located?
In case you wanted to off-load that stock exhaust

rsabeebe

would like to see pics as you move along. replacing mine from the down pipe back right now also.

Kris H

i'd rather be a narcissistic than a ******.
As for the douchebag part - you quickly learn never to go full throttle at public roads.


edit: actually the last part saves you money, because of less speeding tickets.. So - we should treat screamers as investments, shouldn't we?

mahoney944

The wastegate dumped sounds great, it's different for sure then a stock setup and takes some getting use to. You just need to know where and where not let it rip.

rsabeebe

i used to love the blow off sound on my Audi UrS6. would opt for that sound on my 951 instead.

mahoney944

The blow off sound is nice but I wouldn't trade performance for sound. With the bypass valve, you basically send the extra air right back to the turbo for a quicker spool between shifts. The blow off sound just dumps that slight performance boost away (little as it may be). With the dumped wastegate, not only are you getting more sound, but youre also eliminating a large source of back pressure, which creates less strain on the turbo, which speeds up spool time and maximizes performance.

Paulyy

With the factory turbo, it wasn't as fun as it boosted to quick. With this turbo, It was a lot more fun as i had more lag. But i got over it quickly. It was just to loud. There was going to be that one day i boost and the police would hear me from 5 kilometers down the road.

Speed Metal 951

Aaaaaaaaaaaand, back to the topic..
These are pics taken with my phone, unfortunately in no particular order!
Anyway, 3" 304, new TS compgate 40 piped to atmosphere. Snow here, so
I couldn't hear the WG, but the exhaust sounds really nice. Nice and angry. Way more fun than buying one. Looking at this, I realize I didn't
take a nice pic of the whole works on the car. I will get it back on the lift and snap a couple. It fit nice. The drop from the flange down to the underside of the car was cool to make. Not a lot of room in there!














My stock setup has been stashed away for originality's sake.

reno808

you did that all yourself?

rsabeebe

absolutely gorgeous welds. i'd have you build me an exhaust any day. congrats on a beautiful job.

Paulyy

Makes me want to re to my exhaust! Very nice!