Clutch Master Firewall Reinforcement - Page 7 - Rennlist - Porsche Discussion Forums

Notices

Clutch Master Firewall Reinforcement

 
Old 07-06-2014, 06:30 PM
  #91  
admiralkhole
User
 
admiralkhole's Avatar
 
Join Date: Oct 2012
Posts: 1,044
Default

Well hopefully mine is in the mail too =)
admiralkhole is offline  
Old 07-07-2014, 07:04 AM
  #92  
jannes
New User
 
Join Date: Nov 2012
Posts: 3
Default

Originally Posted by vt951 View Post
Jannes, yes I can share some dimensions with you. Let me know what you need. If you have access to 3D CAD program, I could send a model that you can get dimensions from. I'm not going to send out my bracket design (too much time invested in getting it right), but I'll send the plane of the MC mount, locations of mounting studs, and plane of the strut tower face. Anything else, just let me know.
It would be awesome if you could send me a CAD / 3D file. I'll try to PM you my email address.

I have one 931 project car with a torn firewall, but we still need to take it apart to have a good look. Only then could we hope to make measurements ourselves. Do you know if your bracket also fits 924 / 931 ? It really looks like the best solutions I've seen so far.

My 968 daily driver does not seem to have this problem, but I would like something preventative. In that car I don't feel like taking everything (intake, brakebooster etc.) off though. So a simplet bracket that goes over the cilinder instead of in between would be preferable.

Thanks
jannes is offline  
Old 07-07-2014, 03:56 PM
  #93  
admiralkhole
User
 
admiralkhole's Avatar
 
Join Date: Oct 2012
Posts: 1,044
Default

Just arrived! Thank you sir!

Edit: Just installed, great fit and finish. Very happy! Maybe I won't rip my clutch master off the firewall this time

Last edited by admiralkhole; 07-07-2014 at 04:34 PM.
admiralkhole is offline  
Old 07-07-2014, 11:02 PM
  #94  
vt951
Addict
Rennlist Member
Thread Starter
 
vt951's Avatar
 
Join Date: Dec 2005
Location: Cincinnati
Posts: 1,820
Default

Originally Posted by admiralkhole View Post
Just arrived! Thank you sir!

Edit: Just installed, great fit and finish. Very happy! Maybe I won't rip my clutch master off the firewall this time
Awesome, glad you like it.
vt951 is offline  
Old 07-07-2014, 11:03 PM
  #95  
vt951
Addict
Rennlist Member
Thread Starter
 
vt951's Avatar
 
Join Date: Dec 2005
Location: Cincinnati
Posts: 1,820
Default

Originally Posted by jannes View Post
It would be awesome if you could send me a CAD / 3D file. I'll try to PM you my email address.

I have one 931 project car with a torn firewall, but we still need to take it apart to have a good look. Only then could we hope to make measurements ourselves. Do you know if your bracket also fits 924 / 931 ? It really looks like the best solutions I've seen so far.

My 968 daily driver does not seem to have this problem, but I would like something preventative. In that car I don't feel like taking everything (intake, brakebooster etc.) off though. So a simplet bracket that goes over the cilinder instead of in between would be preferable.

Thanks
Got your email, and I'll work up a CAD model to send you.
vt951 is offline  
Old 07-08-2014, 08:15 AM
  #96  
jannes
New User
 
Join Date: Nov 2012
Posts: 3
Default

Thank you Alan! I was able to convert the file and open it. Very cool!

I was mostly looking for the distance from the firewall to the suspension tower and the angles involved. Are those still intact in the image you sent even though you left the middle parts out?
jannes is offline  
Old 07-08-2014, 10:22 AM
  #97  
vt951
Addict
Rennlist Member
Thread Starter
 
vt951's Avatar
 
Join Date: Dec 2005
Location: Cincinnati
Posts: 1,820
Default

Originally Posted by jannes View Post
Thank you Alan! I was able to convert the file and open it. Very cool!

I was mostly looking for the distance from the firewall to the suspension tower and the angles involved. Are those still intact in the image you sent even though you left the middle parts out?
Yes, those distances and angles are exactly what my bracket uses. So if you make your bracket fit those surfaces "line to line" it should be good. Just watch out for the vacuum brake booster!
vt951 is offline  
Old 07-08-2014, 02:29 PM
  #98  
Baptizo
This didn't cost
me any drachmas
Rennlist Member
 
Baptizo's Avatar
 
Join Date: Sep 2010
Location: The Land of FREEDOM
Posts: 5,152
Default

I got mine in the mail yesterday, and it is a very nicely done custom part - thanks!
Baptizo is offline  
Old 08-11-2014, 01:34 PM
  #99  
951kaos
User
 
951kaos's Avatar
 
Join Date: Jul 2010
Location: Chilliwack, BC
Posts: 88
Default

Do you have any left over? If not do you plan on another production run? If so could you please add me to the waiting list.
951kaos is offline  
Old 09-05-2014, 11:36 AM
  #100  
RajDatta
Addict
Rennlist Member
 
RajDatta's Avatar
 
Join Date: Feb 2003
Location: NJ
Posts: 9,676
Default

I would be interested in one as well. Can you please let us know the availability.
RajDatta is offline  
Old 09-05-2014, 01:13 PM
  #101  
azbanks
Freedom Enthusiast
Rennlist Member
 
Join Date: Feb 2007
Location: Phoenix Arizona
Posts: 7,910
Default

Can I get one that is not powder coated? I have a bunch of parts I am taking to the powder coater and I'd include this so it matches the rest on my parts.
azbanks is offline  
Old 09-05-2014, 01:40 PM
  #102  
reno808
Super User
 
reno808's Avatar
 
Join Date: Mar 2005
Location: In the garage trying to keep boost down
Posts: 8,809
Default

i will be interested as well
reno808 is offline  
Old 09-09-2014, 01:57 PM
  #103  
Darwantae951
Retouched
Rennlist Member
 
Join Date: Dec 2004
Posts: 10,835
Default

I'm still interested as well.
Darwantae951 is offline  
Old 09-10-2014, 09:47 AM
  #104  
vt951
Addict
Rennlist Member
Thread Starter
 
vt951's Avatar
 
Join Date: Dec 2005
Location: Cincinnati
Posts: 1,820
Default

Originally Posted by azbanks View Post
Can I get one that is not powder coated? I have a bunch of parts I am taking to the powder coater and I'd include this so it matches the rest on my parts.
Hey, sorry I haven't replied in a while. My job has been really crazy lately, so I haven't been on RL. Anyway, yes I can send yours pre-powder coat, and will knock $10 off as well.

The next batch is delayed due to the fabricator laser cutter machine going down. I will update here when I know more.
vt951 is offline  
Old 09-10-2014, 01:34 PM
  #105  
azbanks
Freedom Enthusiast
Rennlist Member
 
Join Date: Feb 2007
Location: Phoenix Arizona
Posts: 7,910
Default

Originally Posted by vt951 View Post
Hey, sorry I haven't replied in a while. My job has been really crazy lately, so I haven't been on RL. Anyway, yes I can send yours pre-powder coat, and will knock $10 off as well.

The next batch is delayed due to the fabricator laser cutter machine going down. I will update here when I know more.
Great, thanks.
azbanks is offline  

Thread Tools
Search this Thread
Quick Reply: Clutch Master Firewall Reinforcement


Contact Us About Us Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: