Clutch Master Firewall Reinforcement
#77
Rennlist Member
#78
Rennlist Member
Thread Starter
#79
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Guys, I received the batch of 10 brackets this morning from the fabricator. Next is powder coating. Should be ready to ship them early next week. I'll send PM's to the first 10 who already expressed interest to collect payment, and as folks drop out of line I'll contact everyone else in order.
Thanks,
Alan
Thanks,
Alan
#84
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Any chance you could post measurements or even designs for this?
I think I'd prefer having the plate on the outside of the clutch housing instead of in between. I've made a (simpler) bracket before that does that and that worked fine.
Thanks
I think I'd prefer having the plate on the outside of the clutch housing instead of in between. I've made a (simpler) bracket before that does that and that worked fine.
Thanks
Last edited by jannes; 07-05-2014 at 11:44 AM.
#85
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jannes, yes I can share some dimensions with you. Let me know what you need. If you have access to 3D CAD program, I could send a model that you can get dimensions from. I'm not going to send out my bracket design (too much time invested in getting it right), but I'll send the plane of the MC mount, locations of mounting studs, and plane of the strut tower face. Anything else, just let me know.