3 Liter 16v Turbo build
#121
Rennlist Member
Wonder if it's possible to get some Angel Eyes into a non pop up bucket. The tasteful ones not the ghetto ones.
#124
Three Wheelin'
Thread Starter
I got the "baskets" from DRS, but they are probably from the same supplier as anyone uses in the Netherlands; Van Tul Fibreglass. I'm making the plexiglass panels myself!
#126
We got these GTS buckets from ebay but i can order the buckets and lots of other fiberglass and carbon parts here in the Netherlands (but ships worldwide good quality and reasonable prices) from: http://rnr-motorsport.com/
@Bas nice work i h8 you for having your engine done earlier then me.. damn taxes..!! Kidding keep going at this pace can't wait to take a drive with you.
@Bas nice work i h8 you for having your engine done earlier then me.. damn taxes..!! Kidding keep going at this pace can't wait to take a drive with you.
#128
Rennlist Member
Is that link meant to show products? What splitter?
#130
Rennlist Member
Ahh, ok. Looks good. Makes me wonder on the aero of the front there with all the openings though.
#131
Three Wheelin'
Thread Starter
Well.. to be honest i was thinking of making my own splitter from an aluminium plate with the 2 race bars on them to keep them in place. Mostly for trackuse than. Just have to see if i'll do it or not
BTW,
POSTCOUNT 944!
BTW,
POSTCOUNT 944!
#132
Rennlist Member
You can even use Plywood. But you will want to remove it on the street..especially if you have those metal 'stays' to hold it on.
#134
Three Wheelin'
Thread Starter
Well, finally an interesting update; the engine builder finished the cilinderblock! all the cilinders are bored and sleeved so the next thing is the pistons. Pistons are being measured and calculated now and headgasket as well. So here some pictures: