Last bits I cannot use. F.S.
#1
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
Last bits I cannot use. F.S.
I have to get the stuff out of the shop. My friend is moving to another place and I'd rather sell these quick rather than lug them around. I can't ever see needing these again, so take advantage of me. You have my permission.
I'm located in Houston TX. So the wheels and Stock hood might be easier to pick up here. It seems Greyhound will ship them for pretty cheap.
No pics, but a stock black hood in decent shape. no accidents, but a few dings here and there. $50 I can get pics tomorrow.
Cup replica Wheels. 17 x 8 fronts 9" rear. $100 for all four. Nothing fantastic, but not bad at all. (Edit: meh, scratched up - see pics) Sadly they won't fit over my new brake set up, so there's no reason to keep them around. not even for rollers. They have tires on them right now. Plenty of tread, but very very old tires. pics tomorrow or look at any of my drag racing vids on youtube.
Suspension pieces from my '86.
Rear pivot arms with spindles. No play in bearings, Pair.. $90 - SOLD
Front A arms. Ball joints are in good shape with no play. $80
Spindles, Hubs, and Drilled rotors for front - less than 300miles on Rotors and bearings. $125 - SOLD
Clutch bell Housing $20
Turbo engine mounts. Both $20
1987 or newer oil pan. I welded a small crack. it will not leak. Refund + shipping if the fix leaks. It won't. I've tested and ran this on my car like this. New plastic windage tray included was $75 by itself. Your price is $50 pan and new windage. - SOLD
Fuse box Cover. Plastic is good, sticker is not so great, but readable. $10
non collapsed engine mount. Non Porsche I think. $10
Stock Tbar end pieces without rubber. With (Outside only) Weltmeister bushings. Think you can remove the stock rubber yourself no problem? Go do it!!!! lol $50 (EDIT- They are outside bushings only-both - pic is deceiving. Outside one is just slid on the inside to keep parts together. The inside bushings were ruined when I tried to remove them from the carrier. - SOLD
I'm located in Houston TX. So the wheels and Stock hood might be easier to pick up here. It seems Greyhound will ship them for pretty cheap.
No pics, but a stock black hood in decent shape. no accidents, but a few dings here and there. $50 I can get pics tomorrow.
Cup replica Wheels. 17 x 8 fronts 9" rear. $100 for all four. Nothing fantastic, but not bad at all. (Edit: meh, scratched up - see pics) Sadly they won't fit over my new brake set up, so there's no reason to keep them around. not even for rollers. They have tires on them right now. Plenty of tread, but very very old tires. pics tomorrow or look at any of my drag racing vids on youtube.
Suspension pieces from my '86.
Rear pivot arms with spindles. No play in bearings, Pair.. $90 - SOLD
Front A arms. Ball joints are in good shape with no play. $80
Spindles, Hubs, and Drilled rotors for front - less than 300miles on Rotors and bearings. $125 - SOLD
Clutch bell Housing $20
Turbo engine mounts. Both $20
1987 or newer oil pan. I welded a small crack. it will not leak. Refund + shipping if the fix leaks. It won't. I've tested and ran this on my car like this. New plastic windage tray included was $75 by itself. Your price is $50 pan and new windage. - SOLD
Fuse box Cover. Plastic is good, sticker is not so great, but readable. $10
non collapsed engine mount. Non Porsche I think. $10
Stock Tbar end pieces without rubber. With (Outside only) Weltmeister bushings. Think you can remove the stock rubber yourself no problem? Go do it!!!! lol $50 (EDIT- They are outside bushings only-both - pic is deceiving. Outside one is just slid on the inside to keep parts together. The inside bushings were ruined when I tried to remove them from the carrier. - SOLD
Last edited by 95ONE; 10-26-2012 at 01:56 PM.
#6
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
As I suggested to William, I think Greyhound would be the best way to go. About $25 per wheel. I suggest you call them and get a quote on a rim and tire that weighs around 50lbs.
#7
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
ALL Pm's replied.
I didn't mention that the Weltmeister bushings included are only for the outside. I have the inside pieces, but they got destroyed / ruined when I tried to remove them out of the carrier. They are not included in the sale since they are un-useable.
I didn't mention that the Weltmeister bushings included are only for the outside. I have the inside pieces, but they got destroyed / ruined when I tried to remove them out of the carrier. They are not included in the sale since they are un-useable.
Trending Topics
#9
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
Control arms are for an '86 with early offset. Everything for sale up there is. I have never rebuilt the ball joints, but In the 8 yrs I've owned the car, I've only driven it about 500-750 miles! The joints are in pretty good shape. There isn't any play. You could throw these on your car right now and not have any suspension issues. How long will that last? I have no idea. The bushings are missing also.
#12
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
Two in line for the wheels right now. I'm not sure if they have paid for them yet, or are actually ready to pay now? I'll check with them first though. I'll have an answer by end of day. The wheels really are the best deal on here by far.