LS1 conversion
#48
Burning Brakes
Join Date: Nov 2007
Location: Nuke City, NM
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
#52
Racer
Thread Starter
Join Date: Jul 2003
Location: McAllen TX
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
I’m not done with mine & I already want to build another motor & put it in my 928 S this set us is just less complicated & I can buy parts at any local parts house.
I laughed when I bought a flywheel, double roller timing chain & ignition wires & it was less than 400 from Jeggs shipped! Better yet I just bought a spare set of heads for the car for a hundred bucks on an F Body forum.
Just think no more vac or boost hoses popping off. No more W/G or tuning issues & best of all no Vettes pulling me down a straightaway priceless!
I laughed when I bought a flywheel, double roller timing chain & ignition wires & it was less than 400 from Jeggs shipped! Better yet I just bought a spare set of heads for the car for a hundred bucks on an F Body forum.
Just think no more vac or boost hoses popping off. No more W/G or tuning issues & best of all no Vettes pulling me down a straightaway priceless!
#53
Rennlist Junkie Forever
I’m not done with mine & I already want to build another motor & put it in my 928 S this set us is just less complicated & I can buy parts at any local parts house.
I laughed when I bought a flywheel & ignition wires & some other items for the motor & it was less than 400 from Jeggs shipped! Better yet I just bought a spare set of heads for the car for a hundred bucks on an F Body forum.
Just think no more vac or boost hoses popping off. No more W/G or tuning issues & best of all no Vettes pulling me down a straightaway priceless!
I laughed when I bought a flywheel & ignition wires & some other items for the motor & it was less than 400 from Jeggs shipped! Better yet I just bought a spare set of heads for the car for a hundred bucks on an F Body forum.
Just think no more vac or boost hoses popping off. No more W/G or tuning issues & best of all no Vettes pulling me down a straightaway priceless!
TonyG
#55
Rennlist Junkie Forever
#56
No, not Mosquito!
Rennlist Member
Rennlist Member
#57
Racer
Thread Starter
Join Date: Jul 2003
Location: McAllen TX
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
It’s ALIVE!
We got it running tonight. We ran it for a few minutes set off all the smoke alarms in the office & made the garage walls tremble. Now just some last minute items finish some wiring & the ignition panel. We should be able to make it to the Dyno on Saturday baring any unforeseen problems.
Funny side note I found out my fuel rail was missing a schrader valve & fuel damper retaining clip we blew the damper off trying to start it Sunday. I called all the parts houses & GM dealers in the area none in stock minimum 4 day ship. I went to my local muscle car dyno shop they had a LS1 fuel rail in the junk pile 40 bucks out the door. You gotta love it!
We should be able to go to the muffler shop Thursday.
I’m keeping my fingers crossed that I can make my 1st NASA race on the 30th at MSR Houston.
We got it running tonight. We ran it for a few minutes set off all the smoke alarms in the office & made the garage walls tremble. Now just some last minute items finish some wiring & the ignition panel. We should be able to make it to the Dyno on Saturday baring any unforeseen problems.
Funny side note I found out my fuel rail was missing a schrader valve & fuel damper retaining clip we blew the damper off trying to start it Sunday. I called all the parts houses & GM dealers in the area none in stock minimum 4 day ship. I went to my local muscle car dyno shop they had a LS1 fuel rail in the junk pile 40 bucks out the door. You gotta love it!
We should be able to go to the muffler shop Thursday.
I’m keeping my fingers crossed that I can make my 1st NASA race on the 30th at MSR Houston.
#58
Rennlist Junkie Forever
It’s ALIVE!
We got it running tonight. We ran it for a few minutes set off all the smoke alarms in the office & made the garage walls tremble. Now just some last minute items finish some wiring & the ignition panel. We should be able to make it to the Dyno on Saturday baring any unforeseen problems.
Funny side note I found out my fuel rail was missing a schrader valve & fuel damper retaining clip we blew the damper off trying to start it Sunday. I called all the parts houses & GM dealers in the area none in stock minimum 4 day ship. I went to my local muscle car dyno shop they had a LS1 fuel rail in the junk pile 40 bucks out the door. You gotta love it!
We should be able to go to the muffler shop Thursday.
I’m keeping my fingers crossed that I can make my 1st NASA race on the 30th at MSR Houston.
We got it running tonight. We ran it for a few minutes set off all the smoke alarms in the office & made the garage walls tremble. Now just some last minute items finish some wiring & the ignition panel. We should be able to make it to the Dyno on Saturday baring any unforeseen problems.
Funny side note I found out my fuel rail was missing a schrader valve & fuel damper retaining clip we blew the damper off trying to start it Sunday. I called all the parts houses & GM dealers in the area none in stock minimum 4 day ship. I went to my local muscle car dyno shop they had a LS1 fuel rail in the junk pile 40 bucks out the door. You gotta love it!
We should be able to go to the muffler shop Thursday.
I’m keeping my fingers crossed that I can make my 1st NASA race on the 30th at MSR Houston.
Dude... you're gonna love it. These cars rock with the LS1 engine in them.
BTW, what have you done about power brakes? (since you mentioned your NASA event)
TonyG
#59
Racer
Thread Starter
Join Date: Jul 2003
Location: McAllen TX
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Ill probably go to the hydro boost set up like you did but, I wont have time to install it before this event so ill have to use manual brakes. I may call you for advice on the install.
#60
Rennlist Member
Looking factory dare I say. Thanks for that pic from the side too Rene. Don't forget to get some video once you've shaken it down.