When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Since all the Tubo motors were 2.5 to start with a 3.0 block would I just need to get a good 3.0 donor motor???? Or get an 89 or newer car with the better block???
If you go with Andial Mahles, they are 104.5mm, so you can go with the 3.0 block which is not so perfect.
no offense or disrespect, but I'm just curious; where are your turbochargers made?
A friend of mine had LR charger which was grab and badly built. So **** happens even to the best manufacturers.