WTB: Torque Tube bearing carriers!
#31
Burning Brakes
Thread Starter
Join Date: Nov 2007
Location: Nuke City, NM
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I was kinda thinking it was a toss-up between the delrin and soft aluminum...with the aluminum having the advantage that it could be staked to the bearing.
The more i read, the more unhappy i am with the current rebuilding processes. Incorrect bearings, incorrect sleeves, and then there's the fact that the original design didn't last with all the "correct" parts....
The more i read, the more unhappy i am with the current rebuilding processes. Incorrect bearings, incorrect sleeves, and then there's the fact that the original design didn't last with all the "correct" parts....
#32
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This sucker looks beefy enough to support the prop shaft on a U-boat... oh wait...
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
LS1, did you get yours yet?
![](http://members.rennlist.com/sharkskin/Pages_SA_R30-Drivetrain-ConstantineCarrierBearingSide.jpg)
#33
Burning Brakes
Thread Starter
Join Date: Nov 2007
Location: Nuke City, NM
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
No, expecting them sometime around the end of the month, or mid next month. I "found" some other things to work on in the meantime, you know how that goes.... Hehe
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#34
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Looking forward to seeing how this will turn out.
I rebuilt the torque tube on my S2 a couple of years ago and the 6006 ZZ C5 bearings I used are still slightly noisy, if functional. Wondering if these new ones will be totally quiet.
I rebuilt the torque tube on my S2 a couple of years ago and the 6006 ZZ C5 bearings I used are still slightly noisy, if functional. Wondering if these new ones will be totally quiet.
#35
Rainman
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
got the aluminum carriers, they look fantastic and are a perfect fit into the new bearings. they are wonderfully machined pieces. i might be doing my torque tube r/r over spring break (week after next) so when i do i will let you guys know how it goes
#36
Rennlist Member
#37
Rennlist Member
#38
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I need to do this soon. Id be happy to test them out on my 3.0t.![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#39
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You would need to contact Constantine. He mentioned the other day he has 944/51 testers lined up, but it couldn't hurt to ping him. See the link in post #8, you'll find his posts in that thread and you can PM from there.
Member websites are down, so all of the pics I have posted have temporarily disappeared.
Member websites are down, so all of the pics I have posted have temporarily disappeared.
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
#40
RL Community Team
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That explains why I was waiting for minutes for link from pg 2 to load! Whole minutes I say!
I'm happy with my 6006 zz bearings and delrin bushings. I'm not even entirely sure I put the new bearings in the right spot - no marks in the shaft. I just took the distance from the pilot bearing to the bearing just inside the tranny mainshaft seal, and evenly spaced 4 TT bearings in that distance. But it's much quieter than before. If I ever do another TT rebuild I think I'd try the gerthy bearings soon to be available.
I'm happy with my 6006 zz bearings and delrin bushings. I'm not even entirely sure I put the new bearings in the right spot - no marks in the shaft. I just took the distance from the pilot bearing to the bearing just inside the tranny mainshaft seal, and evenly spaced 4 TT bearings in that distance. But it's much quieter than before. If I ever do another TT rebuild I think I'd try the gerthy bearings soon to be available.
#41