2.8 Big Bore Project (with pics)
#229
Three Wheelin'
Thread Starter
Join Date: Jul 2008
Location: Dallas / Chicago
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
#230
Nordschleife Master
I resemble that remark....but haven't run into any major issues...
yet....
Sucks, mine has been sitting in pieces in front of my house for over a week for a "simple" turbo rebuild... just waiting for some studs, a seal, and a new oil line to put it all back together... maybe next week...
Was it because of running too rich or to hot?
yet....
Sucks, mine has been sitting in pieces in front of my house for over a week for a "simple" turbo rebuild... just waiting for some studs, a seal, and a new oil line to put it all back together... maybe next week...
Was it because of running too rich or to hot?
#234
Rennlist Member
Join Date: Feb 2003
Location: Chicago
Posts: 3,526
Likes: 0
Received 0 Likes
on
0 Posts
#235
Rennlist Member
Sorry to hear of this W. I know how you feel. Still, you will have something very nice soon!!
#236
Nordschleife Master
Just as long as it wasn't the ethanol injection.. I'm putting mine in and want to make sure it wasn't a eth backflash reaching his turbo... last time it happened to me it blew the entire nose off my car...
#237
Three Wheelin'
Thread Starter
Join Date: Jul 2008
Location: Dallas / Chicago
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
all of the above..
the nitrous was a secret..
Ah sht happens, you now..
Ah sht happens, you now..
#238
Nordschleife Master
Do you have an idea of the cause? some of us out here might be able to learn the lesson without learning it first hand... Although first hand is often the quickest way to learn...
#239
Three Wheelin'
Thread Starter
Join Date: Jul 2008
Location: Dallas / Chicago
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
Basically, my coolant line was not connected on the turbo. The gt3076r requires custom fab to run coolant. I was driving the car to the shop to get this done and that is where we assume most damage was done. ( the place was about a 45 min drive) This is no ones fault but my own.
Damage done: $1500
#240
Nordschleife Master
+1 Most people learn things the hard way.
Basically, my coolant line was not connected on the turbo. The gt3076r requires custom fab to run coolant. I was driving the car to the shop to get this done and that is where we assume most damage was done. ( the place was about a 45 min drive) This is no ones fault but my own.
Damage done: $1500
Basically, my coolant line was not connected on the turbo. The gt3076r requires custom fab to run coolant. I was driving the car to the shop to get this done and that is where we assume most damage was done. ( the place was about a 45 min drive) This is no ones fault but my own.
Damage done: $1500