lart951

the front bumper is $ 900.00 from the factory, I might be able to fix it with epoxy.

Gator_86_951

A transport company we used once cracked the front of our fiberglass bodied cobra roadster. I tihnk we got them to repay. Good luck dood.

DDP

I already sent a pm on this part. Don't attempt to undercut me.

lart951

please don't distract me I am trying to remove the head as fast as I can without damaging other stuff. It's very difficult working with the small blade.

ryanm6100

If you have a used timing belt I would like to know shipping to 75039? I will pay top dollar.

lart951

I have all those parts the used water pump, the sliced tiiming belt fixed with duct tape just be patient.

mtnman82

Luis, I'm drooooooling ..... very nice!!!

lart951

The car runs good, it does need a lot of tuning, the car needs tuning on this car. Hopefully i should be able to install a new head gasket monday and let's cross fingers that there is no scoring on the block.

Geneqco

Well, I hope it goes well for you Lart - should be awesome. And I hope you sort out the delivery people, I'd hate to see it parted out just because of that fog light

Geneqco

BTW you really should get your Avatar sorted out with Richard... otherwise he could wait for you to get the car all fixed up and sue you, accepting the car back as settlement - it's a common ploy used against illegal aliens; especially murdering, massacre-ing, malicious, Mexican 951 vultures.

lart951

Well, some pictures from RKD's engine to put some closure in RKD"s mind.

The HG was damaged by severe detonation, why? it is unkonw, the cyl chambers had minimal scoring, nothing that you can feel with the tip of the nail, so the block is good but I don't like the pattern of the scoring which is in the 2 sides of the chamber, so it was a wise decision by Richards to sell the car because sooner or later it was going to self destruct. So in order to find out why the cyl chambers are scored I need to take the whole block apart.

Opeth

jesus lart what exploded in your garage? Looks like a meth lab

lart951

Shssss.....man my wife hates me

ehall

lart, is it a 88mm crank?

lart951

I don't know all I know so far is that it is a 3.0L knifed and edged crossdrilled crank.