Laust's Vacuum Manifold GB
#1
Laust's Vacuum Manifold GB
Hey guys, I was looking to buy one of his 5-port two banjo bolt vacuum manifolds and sorta sparked a renewed interest in his VERY nice product. I'm not sure of the exact construction and maybe he can chime in as far as that. The options as far as VMs is as follows:
4-port single banjo
5-port single banjo
5-port double banjo
If there are any other variations I'm sure he'll post them. I'm ordering a 5-port double banjo VM. Laust, could you please post your current supply so I don't mess things up and say you have more than you actually do!
-Darwin
4-port single banjo
5-port single banjo
5-port double banjo
If there are any other variations I'm sure he'll post them. I'm ordering a 5-port double banjo VM. Laust, could you please post your current supply so I don't mess things up and say you have more than you actually do!
-Darwin
#2
I would like a 5-port dual-banjo VM if there are any left. It worked great on my other 951 and allows for better vac line routing and equipment. Just let me know when and how to pay.
#4
In his response to the origional thread he said he had 4 5-port dual banjo bolt VMs left, so theres enough for the three of us. That makes only 1 5-port dual banjo VM unclaimed. As long as laust recognizes this. Heres a list:
Bonestock951s - 5-port dual banjo
KuHL 951 - 5-port dual banjo
reno808 - 5-port daul banjo
That sound correct?
BTW, both of you have early 951s, why do you need the double banjo version?
-Darwin
Bonestock951s - 5-port dual banjo
KuHL 951 - 5-port dual banjo
reno808 - 5-port daul banjo
That sound correct?
BTW, both of you have early 951s, why do you need the double banjo version?
-Darwin
#5
Originally Posted by Bonestock951S
...BTW, both of you have early 951s, why do you need the double banjo version?
-Darwin
-Darwin
Trending Topics
#10
I am going to be getting a 5 port single banjo bolt from Laust.
However, he pm'ed and said that he does not currently have any of that type left and that I would have to wait until he made a new batch of manifolds if that is what I wanted.
So anyone looking for the 5 port, single bb will have to wait.
However, he pm'ed and said that he does not currently have any of that type left and that I would have to wait until he made a new batch of manifolds if that is what I wanted.
So anyone looking for the 5 port, single bb will have to wait.
#11
Originally Posted by Bonestock951S
Did you drill another hole into the intake manifold?
-Darwin
-Darwin
#12
Laust has contacted me about passing the production off to me. I told him that I wanted to take it on, I will asses the project hopefully later tonight.
This is all still up in the air, so anything is subject to change. I am excited about offering another product though, I should be able to make them in volume...........
This is all still up in the air, so anything is subject to change. I am excited about offering another product though, I should be able to make them in volume...........
#15
Originally Posted by sharky47
Laust has contacted me about passing the production off to me. I told him that I wanted to take it on, I will asses the project hopefully later tonight.
This is all still up in the air, so anything is subject to change. I am excited about offering another product though, I should be able to make them in volume...........
This is all still up in the air, so anything is subject to change. I am excited about offering another product though, I should be able to make them in volume...........