Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

5 speed or 6 speed search is not my friend...

Thread Tools
 
Search this Thread
 
Old 01-06-2007 | 10:37 AM
  #31  
Olli Snellman's Avatar
Olli Snellman
Race Car
 
Joined: Jun 2001
Posts: 4,479
Likes: 4
From: Finland
Default

Don't know the numbers, but i have seen 968 trans under 951 with working speedometer which was done by using Audi parts. I suppose if you can find ETKA (VAG PET) you can find out the part numbers. For some reason my ETKA does not work currently.
Old 01-06-2007 | 12:28 PM
  #32  
Weston Dillard's Avatar
Weston Dillard
Racer
 
Joined: May 2002
Posts: 354
Likes: 11
From: Austin, TX
Default

Thanks Olli, still useful information!

West
Old 01-06-2007 | 10:10 PM
  #33  
WAZRIK's Avatar
WAZRIK
Track Day
 
Joined: Dec 2006
Posts: 15
Likes: 0
Default

Hey guys I have a 1994 6 spd in my 86 turbo love it but speedometer gauge not working because the 968 doesnt have speed sensor. Please send some info... I was thinking of converting to a 968 suspension.
Old 01-07-2007 | 07:01 AM
  #34  
Olli Snellman's Avatar
Olli Snellman
Race Car
 
Joined: Jun 2001
Posts: 4,479
Likes: 4
From: Finland
Default

did you read what i wrote earlier?
Old 03-18-2007 | 03:08 PM
  #35  
Thom's Avatar
Thom
Race Car
 
Joined: Mar 2002
Posts: 4,329
Likes: 41
Default

Originally Posted by thingo
At some stage the 951 unit was superseded, my original was 928 618 119 05,
bosch number 0 265 103 035, I was lucky that my brother has a 968 cs, I borrowed his to make sure.

You need 928 618 118 00, bosch 0 265 103 039, (as listed on the PET)I picked one up on ebay, the PET show the parts required for replacement, which may not be the original part. Works perfectly, have had it in for a few months.

Thanks Rod
Thanks for the info - I found a 968 unit in Germany two weeks ago, we fitted it yesterday and the speedometer finally works !
Old 03-18-2007 | 03:55 PM
  #36  
Darwantae951's Avatar
Darwantae951

 
Joined: Dec 2004
Posts: 11,034
Likes: 25
Default

Thom, can you put up a list of the parts you used to make the speedo work? I'm assuming you used the Audi parts, correct?

-Darwin
Old 03-18-2007 | 04:15 PM
  #37  
DFASTEST951's Avatar
DFASTEST951
Thread Starter
Rennlist Member
 
Joined: Apr 2003
Posts: 2,841
Likes: 6
From: Las Vegas NV
Default

+2 on the list of parts.
Old 03-18-2007 | 05:12 PM
  #38  
Thom's Avatar
Thom
Race Car
 
Joined: Mar 2002
Posts: 4,329
Likes: 41
Default

To make the speedo work the 968 ABS unit and the 968 G16 relay are the parts required, as posted earlier in this thread - all good old used Porsche parts
Old 03-18-2007 | 07:17 PM
  #39  
anders44's Avatar
anders44
Three Wheelin'
 
Joined: Feb 2007
Posts: 1,324
Likes: 0
From: Norway
Default

sorry for posting again, but I've never gotten an answer,

the 01E is a quite expensive box to buy with LSD and all if it has "porsche" on it.. soo.

has anyone tried the AUDI 01E from the FWD cars? the A8 even has a cooling loop on its tranny and is very cheap. has anyone got access to a porsche and an audibox and can check the differences?

it would be a great new source for 6 speeds for our cars.



Quick Reply: 5 speed or 6 speed search is not my friend...



All times are GMT -3. The time now is 11:21 PM.