Show your 951 pics here......
#2839
Addict
Rennlist Member
Rennlist Member
#2840
I thought I would add these
87 951
911 Charcoal Gray
HY35x.63T3 (Soon to be HY35 x 1.00 Twin Scroll T3 with QSV)
Long tube SS headers by me
M tune running E85
FMIC
3" SS Exhaust
Dual Port Waste Gate
Intake by me
BMW TB
Wide Fire Head Gasket
Fire Ringed head
Ported Head
NO AC
Freremic Clutch
20% PP
Wide Band LC1
12" Subs in Fiberglass Box where Rear Seat Was
Broadfoot (they suck) GT2 Body kit molded in by me
Front air foil
19"x11" in rear with 295s (till done then 335s) and 19"x8" with 255 in the front
86 951 (Wife's Car)
Stock Motor for now
Turbo twists
Tint
Subs
simple
SOON TO BE
HY35/.63T3
M Tune
Intake
Exhaust
Headers
LC1
E-85
Feremic and 20% PP
911 Charcoal Gray
HY35x.63T3 (Soon to be HY35 x 1.00 Twin Scroll T3 with QSV)
Long tube SS headers by me
M tune running E85
FMIC
3" SS Exhaust
Dual Port Waste Gate
Intake by me
BMW TB
Wide Fire Head Gasket
Fire Ringed head
Ported Head
NO AC
Freremic Clutch
20% PP
Wide Band LC1
12" Subs in Fiberglass Box where Rear Seat Was
Broadfoot (they suck) GT2 Body kit molded in by me
Front air foil
19"x11" in rear with 295s (till done then 335s) and 19"x8" with 255 in the front
86 951 (Wife's Car)
Stock Motor for now
Turbo twists
Tint
Subs
simple
SOON TO BE
HY35/.63T3
M Tune
Intake
Exhaust
Headers
LC1
E-85
Feremic and 20% PP
#2842
Rennlist Member
Cars look great Dave. Great work on the bodykit molding. Looks like you could drop the car down an inch to full up those guards even more. I'd be tempted to try some 968 mirrors on it too.
#2843
Awesome widebody. any more shots to post??
#2845
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#2846
Rennlist Member
It's the same kit as on my car but he's blended it in with a considerable amount of skill. I like both looks but one is definitely easier than the other.
#2849
#2850
Rennlist Member
No, he has the same fender flares and he's very skillfully blended them into his stock fenders. The other difference is that he's also attached the front nose bumper panel which is 1" wider either side which gives greater clearance for the front wheels.