jej3

Adam posted this on the SITM Caravan Thread....

Having used Glympse for my first road trip to Frenzy last year, I have to say it is pretty awesome!

It would be great if all of the inbound folks to SITM were using it ... always fun to watch the Sharks converge

skpyle

I've downloaded it on my iPhone, still trying to figure out how to use it...

Petza914

I'm in too. I'll enter the sitm20 tag and start sharing on Friday morning as I start off

M. Requin

^+1!

drscottsmith

Ill be on Saturday as I drive up - anyone else planning to come through the Greenville/Spartanburg area on SATURDAY am?

-scott

Adamant1971

Several hours later, that little bastard is changed and my steering is tight. Gonna feel this in my elbow later, hopefully I can get a cortisone shot before leaving on Thursday.

M. Requin

What I said- good work, see you Thursday!

Adamant1971

Delete

Randy V

Where's DR?

Gary Knox

Anyone who is attending SITM and wants a GREAT drive, I recommend the 'Tail of the Dragon', but approach it from the TN side. I drove it last week on the way to a BMW event in Asheville NC, and really loved the sharp corners, steep road going up from TN. Frankly I found the NC side of the 'tail' pretty 'ho hum'. Enjoy it if you do, and keep the tires on the road surface. Lots of bikes, but whenever I caught up to one or a group of them, they were very courteous and pulled off to the side at the first opportunity and let me pass. The 20 year old BMW 840Ci loved those climbing curves.

Have a good time at SITM

Gary

Adamant1971

Well it looks like the U-joint is worn as well. I knew I should have just done a complete R&R of the steering. Now I'm stuck, not sure if it's safe to drive it. It does drive ok and there doesn't seem to be any play in the steering, just a knock. FYI the knock is only when dry turning the wheel, at speed it is smooth and the wheel turns with every small input to the wheel. If I had not dry turned the wheel in my garage are probably would never have noticed.

I guess there is a chance that it could be my rack as well. Anyways I'm out of time, so it's risk it or stay home. ??????

AirtekHVAC

Risk it, or drive the Saab!

drwhosc

DRScottSmith. Will be leaving Spartanburg on Friday. going for the social on Friday..

Adamant1971

Installng a rebuilt rack tomorrow. Then alignment on Wednesday I hope.

Petza914

Here's a partial list of the 928 parts I'll be bringing to SiTM this year for sale during the Saturday swap meet in case anyone is interested in reserving anything:

1. Complete K-Jet Spider Intake - spider body, legs, hardware, injectors, etc
2. Black Carpeted Rear Panel Tool Holder (no tools) from a '90/91 GT
3. Plastic Door Thresholds with the curved ends and "928" in the center
4. Complete Set of Door Lock Vacuum Lines
5. Miscellaneous OB Front bumper light housings, lenses, etc
6. Gauge Panel
7. Brake & Clutch Pedal Pads with "928" in the nubs
8. Black Fuse & Relay Panel Cover
9. Black Foam Hood Pad (both a new large section with Porsche crest & small used section with "PORSCHE" word on it)
10. Windshield Wiper Arm
11. Plastic Air Intake Hose
12. 1 Side Vinyl A-Pillar trim (don't recall which side)

...and some other stuff

Looking forward to seeing everyone in a few days.

Pete