SHARKS IN THE MOUNTAINS 2017 - 928 SPECIALISTS 20th Annual 928 Event: June 2-4, 2017
#76
Three Wheelin'
Join Date: Feb 2004
Location: Jacksonville and sometimes St. Aug Beach, FL
Posts: 1,727
Received 342 Likes
on
171 Posts
Adam posted this on the SITM Caravan Thread....
Having used Glympse for my first road trip to Frenzy last year, I have to say it is pretty awesome!
It would be great if all of the inbound folks to SITM were using it ... always fun to watch the Sharks converge
It would be great if all of the inbound folks to SITM were using it ... always fun to watch the Sharks converge
#78
RL Community Team
Rennlist Member
Rennlist Member
I'm in too. I'll enter the sitm20 tag and start sharing on Friday morning as I start off
#81
#83
Delete
Last edited by Adamant1971; 05-28-2017 at 12:28 AM.
#85
Rennlist Member
Anyone who is attending SITM and wants a GREAT drive, I recommend the 'Tail of the Dragon', but approach it from the TN side. I drove it last week on the way to a BMW event in Asheville NC, and really loved the sharp corners, steep road going up from TN. Frankly I found the NC side of the 'tail' pretty 'ho hum'. Enjoy it if you do, and keep the tires on the road surface. Lots of bikes, but whenever I caught up to one or a group of them, they were very courteous and pulled off to the side at the first opportunity and let me pass. The 20 year old BMW 840Ci loved those climbing curves.
Have a good time at SITM
Gary
Have a good time at SITM
Gary
#86
Well it looks like the U-joint is worn as well. I knew I should have just done a complete R&R of the steering. Now I'm stuck, not sure if it's safe to drive it. It does drive ok and there doesn't seem to be any play in the steering, just a knock. FYI the knock is only when dry turning the wheel, at speed it is smooth and the wheel turns with every small input to the wheel. If I had not dry turned the wheel in my garage are probably would never have noticed.
I guess there is a chance that it could be my rack as well. Anyways I'm out of time, so it's risk it or stay home. ??????
I guess there is a chance that it could be my rack as well. Anyways I'm out of time, so it's risk it or stay home. ??????
Last edited by Adamant1971; 05-28-2017 at 12:58 PM.
#89
#90
RL Community Team
Rennlist Member
Rennlist Member
Parts for Swap Meet on Saturday
Here's a partial list of the 928 parts I'll be bringing to SiTM this year for sale during the Saturday swap meet in case anyone is interested in reserving anything:
Looking forward to seeing everyone in a few days.
Pete
- Complete K-Jet Spider Intake - spider body, legs, hardware, injectors, etc
- Black Carpeted Rear Panel Tool Holder (no tools) from a '90/91 GT
- Plastic Door Thresholds with the curved ends and "928" in the center
- Complete Set of Door Lock Vacuum Lines
- Miscellaneous OB Front bumper light housings, lenses, etc
- Gauge Panel
- Brake & Clutch Pedal Pads with "928" in the nubs
- Black Fuse & Relay Panel Cover
- Black Foam Hood Pad (both a new large section with Porsche crest & small used section with "PORSCHE" word on it)
- Windshield Wiper Arm
- Plastic Air Intake Hose
- 1 Side Vinyl A-Pillar trim (don't recall which side)
Looking forward to seeing everyone in a few days.
Pete