Car wont start :(
01-11-2016, 08:59 AM
#16
NOTE dont install a used check valve or a used accumulator.
You will need 3 new sealing washers for the check valve.
NOTE dont try to reuse the old sealing washers, they will be work hardened .
Thus the ensuing amount of tightening will crush the metal short hose end and then this will deform and require a new short line as well as 3 new sealing washers.
You will need 3 new sealing washers for the check valve.
NOTE dont try to reuse the old sealing washers, they will be work hardened .
Thus the ensuing amount of tightening will crush the metal short hose end and then this will deform and require a new short line as well as 3 new sealing washers.
By the way, do you know if fuel accumulator from a 911 with K-jet is the same as in 928 with K-jet?
01-11-2016, 09:34 AM
#17
Team Owner
you should look at PET to see if this viable