Best on-car coil spring compressor?
#2
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://www.harborfreight.com/single-...sor-43753.html
I used this on my Delorean. Worked well and very sturdy. Not sure if it fits in the 928 wheel well or not.
I used this on my Delorean. Worked well and very sturdy. Not sure if it fits in the 928 wheel well or not.
Last edited by hacker-pschorr; 06-17-2015 at 10:25 PM. Reason: Fixed link
#3
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've used the loaner coil spring compressors from Auto Zone and they worked fine on the car. I didn't intend to purchase them, but ended up holding them for so long, they just kept deposit and now I own them... not sure if that's the cheapest route to buy them though...
#4
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
http://www.harborfreight.com/single-...sor-43753.html
I used this on my Delorean. Worked well and very sturdy. Not sure if it fits in the 928 wheel well or not.
I used this on my Delorean. Worked well and very sturdy. Not sure if it fits in the 928 wheel well or not.
Its $35 on Ebay, $70 at HF, and $130 on Amazon.
Hows bout that...
#5
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I once tried to use a HF one that looked identical to the current one and I could not get it on the coils. There was not enough room between the coils.
#6
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
+1 on Bill's experience, I couldn't get the clamshell style HF unit on the front springs either.
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
#7
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
+1 on Bill's experience, I couldn't get the clamshell style HF unit on the front springs either.
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
I'm not generally a fan of using the hoook-and-rod style compressors but they do work inside the wheelwell. Most parts places have them on their free-rental program if you don't want to shell out the $20-30 needed to buy a set. More work and not nearly as safe as the floor-standing unit. The little muffler-clamp "safety clamps" seem a little wimpy but they do the job. Put tape on the coils where the hooks attach to avoid damaging the paint on the spring.
Trending Topics
#8
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Those fingers come off...right?
#9
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
+1 on Bill's experience, I couldn't get the clamshell style HF unit on the front springs either.
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
How 'bout one of these? (No idea whether it would work on a 928...)
http://www.ebay.com/itm/MacPherson-I...-/281312195036
To use this one..I'm trying to imagine..alone the spring's side..is there room for this to be beside the spring, and extend 5-6" below it.
Or..this would work...
#11
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I cant find a youtube for this specific unit yet but units LIKE it, that are much larger for bench use.
To use this one..I'm trying to imagine..alone the spring's side..is there room for this to be beside the spring, and extend 5-6" below it.
Or..this would work...
Amazon.com: SG Tool Aid 62900 The Strutter MacPherson Strut Coil Spring Tool: Automotive
To use this one..I'm trying to imagine..alone the spring's side..is there room for this to be beside the spring, and extend 5-6" below it.
Or..this would work...
Amazon.com: SG Tool Aid 62900 The Strutter MacPherson Strut Coil Spring Tool: Automotive
The one that Rob suggested won't work in the wheelwell unfortunately. The 'blades' get fitted through the coils, then the compressor part slides over the flaps on them once they are in the coils and squared up. We couldn't get enough compression to get the shock nut off and shock dropped out the bottom, and have enough room above the UCA to get the spring and compressor out. We ended up dropping the LCA and taking the spring/shock out the conventional way, and used Rob's floor-standing tool to disassemble.
#13
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I think it could, but I've never tried it. Had to make some minor adjustments when I swapped out shocks and springs, and attached the compressors on the coils on the car and compressed the spring for adjustment of the shock/spring/seat position.
Is there a reason you wouldn't remove the whole shock/coil over from the car? Much easier to work on for disassembly and assembly.
Is there a reason you wouldn't remove the whole shock/coil over from the car? Much easier to work on for disassembly and assembly.
#14
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I think it could, but I've never tried it. Had to make some minor adjustments when I swapped out shocks and springs, and attached the compressors on the coils on the car and compressed the spring for adjustment of the shock/spring/seat position.
Is there a reason you wouldn't remove the whole shock/coil over from the car? Much easier to work on for disassembly and assembly.
Is there a reason you wouldn't remove the whole shock/coil over from the car? Much easier to work on for disassembly and assembly.
The drivers side I had to use prybars on the top of the assy, to get it INTO the strut tower, took us an hour to get it in there.
#15
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I've used the simple set ( some csll it the Loaners type, I don't know what that means). I cheated by putting the lower hooks under the spring discs, not under the second lowest spring circle. this gave me a lot more spring length to compress so less force needed. But I guess a lot of mechanics will shout about danger now...