hacker-pschorr

I've decided that anything that has been sitting on the shelf more than a few years has to go.

Need to add shipping to all prices. I prefer PayPal

Click on the links for photos

928 Factory Bra for spoiler-less 16V - $100
I've never fully installed it since both of my cars have spoilers. I have no idea why I even have it. I did not fully stretch it out for the photos, if you've never installed one of these before, they are tight.
Includes original storage case and box:
http://www.erik27.com/ForSale/928%20Bra/

S4 Caliper and pad set - $350
I pulled these off an 89 burn car, they will need some cleaning up before use but the fire did not damage them. The rubber bits on the control arms, as well as the ball joint boots were still 100% in-tact:
http://www.erik27.com/ForSale/S4%20Calipers/

S4 Front Upper control arm set - $150
These were pulled from a junk yard car - one boot is torn
http://www.erik27.com/ForSale/Upper%20Control%20Arms/

S4 Front Lower control arm set - $150
These were also a junk yard pull
http://www.erik27.com/ForSale/Lower%20Control%20Arms/


***sold items below***

First set of Eibach Springs - $400 - Sold
These are new in the box.
78-86 owners will have to get a set of spring pearches from 928 International
http://www.erik27.com/ForSale/Eibach%20Springs%201/

Second set of Eibach Springs - $400 - Sold
These are also new and in the box
http://www.erik27.com/ForSale/Eibach%20Springs%202/

MSDS Coated Headers - $350 - Sold
These were purchased from a Rennlister 3-4 years ago, per his thread "They have been coated with an insulating paint in and out - black. It was done professionally, at a local coater."
I had the original flange cut off and VIB-1491C V-Band Clamps welded on.
http://www.erik27.com/ForSale/Headers/

Early 8-disc Limited Slip from a 79 - $600 - Sold
I purchased this from from Mike Simard many years ago, been sitting in the box since it arrived.
http://www.erik27.com/ForSale/LSD/

Shark Woofer by Hans - $450 - Sold
This is the Sharkwoofer housing, fan, grill and Dayton 10" sub. Read about the details here:
https://rennlist.com/forums/928-foru...arkwoofer.html
This has never been used, other than connecting it up to my home stereo just to hear it do something. It's been sitting on a shelf ever since.
The woofer is currently installed, I removed it for the photos. The grill is a very tight fit, I never installed that. I recall Hans telling me the housing may have to be filed down for the grill to fit perfect.
http://www.erik27.com/ForSale/Shark%20Woofer/

supercedar

Can you tell me more about the condition of control arms. How many miles and were they damaged ?

Mrmerlin

I want the OZ racing wheel set back how much?

Kevin in Atlanta

PM sent on limited slip.

hacker-pschorr

You serious?

If you knew how many sets of wheels I have, you would really wonder why I bought them in the first place.

Long story short, I'll sell them back. I've put maybe 100 miles on the tires.

I'll be digging them off the top shelf in a short while to get some photos. I have no idea of the mileage and no damage.

Since they are not mounted, I cannot really test the condition of the bushings.

EDIT - Photos have been added

Richards 928

Are the headers for 16v? I am looking for a set for my '80 4.5L

MjRocket

Hacker

Will those headers fit an 87s4?

Thx

hacker-pschorr

Yes

Only if you cut off the flanges and weld on new ones

Shawn Stanford

I'm interested in the Eibachs. I have an '82. I'd just like to lower the car and tighten up the suspension a tad, I don't want to take him racing. What do they do to the ride height and quality?

Richards 928

Ok on the headers.

PM sent

Richard

77tony

PM sent on Shark woofer. T

robot808

Looks like the headers are gone, but let me know if it doesn't work out for any reason.

Petza914

Kevin,

I might need the LSD for my convertible if you don't have an immediate use for it.

Hacker, let us know.

Kevin in Atlanta

Pete, it's yours.

Petza914

Thanks buddy. I need to hear from Carl at 928 on Monday to make sure my car doesn't already have one and that he can install it when doing my engine and trans work, but if I don't have it and he can do it, I'll take it. Thanks.

Kevin, see you tomorrow.