Know where this goes?
#1
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just finished my Oil Pan Gasket, Motor Mounts & Steering Rack replacement. When I was cleaning up the area, I found this washer. Does anybody know where it goes?
#5
Drifting
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Exhaust manifold and the A-arm was not removed on this go around.
Thanks for the replies, I will see if I can see if anything is missing. Don't want to start removing things again.
Thanks for the replies, I will see if I can see if anything is missing. Don't want to start removing things again.
Trending Topics
#11
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Head bolt washer. How the hell did that get loose?
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
#12
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That's what I was thinking too Rob. However I do recall this washer when I have taken my front suspension off. Just not sure if it is #6 in the PET or not.
#14
Shameful Thread Killer
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Maybe if a bottom MM washer, and he has aftermarket MM, this washer would be left over. Meaning there should be two leftover depending on which aftermarket MM was installed.
#15
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It isn't bottom MM washer. They're much larger.
It's either the top MM washer, or it's the washer for the bolt which holds up the bottom protection plate on the wheel side of the rack input.
It's either the top MM washer, or it's the washer for the bolt which holds up the bottom protection plate on the wheel side of the rack input.