928 Classics, Group Buy - Fire Extinguisher Bracket with Quick-Release Mount
#46
#47
Rennlist Member
I got an answer on getting an empty PB2 shipped to the Safecraft agent here in Australia, from Steve Baker at Safecraft in the US, who was really helpful.
The Oz agent got back to me recently ... Expensive !!!!!!! $417.00 AU including tax plus shipping, for a PB2 (no bracket) filled with FE36, which is about $200+ more than a Halon filled PB2 (no bracket) in the US. I don't want to put a powder extinguisher in either of my cars, but the whole package is getting to around $650+ AU ..... dang!
The Oz agent got back to me recently ... Expensive !!!!!!! $417.00 AU including tax plus shipping, for a PB2 (no bracket) filled with FE36, which is about $200+ more than a Halon filled PB2 (no bracket) in the US. I don't want to put a powder extinguisher in either of my cars, but the whole package is getting to around $650+ AU ..... dang!
#48
Rennlist Member
Thread Starter
update
Fit up went well and installation is easy. Move seat full forward & full up, 4 screws and a 1/4 drive ratchet. Done.
Will start shipping out tomorrow.
Will start shipping out tomorrow.
#49
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Nice that you don't have to pull the seat to install (in fact remarkable!).
That PB2 in crinkle black is very nice!
Can you reinstall the plastic trim piece (with the center portion trimmed back)...?
Alan
That PB2 in crinkle black is very nice!
Can you reinstall the plastic trim piece (with the center portion trimmed back)...?
Alan
#50
Rennlist Member
Thread Starter
I didn't try to reinstall the cover as I knew it would require some modification.
If it's doable, that sure would look well-integrated.
#52
Rennlist Member
Thread Starter
Thanks for your interest! Yes, will be taking orders following fulfillment of this group buy.
At that time, I'll have them available for purchase thru my site http://928classics.com
I'll be reselling the Safecraft mount, so one could purchase both the seat bracket and quick-release mount thru 928 Classics!
#53
Nordschleife Master
^^^^^
I might have to do that... All 928's should have them (in fact all cars should keep one in them) but with my fleet it would be cost prohibitive to outfit all of them... Thinking the '95 and '93 since both are lightly to highly modified should probably have these in them...
I might have to do that... All 928's should have them (in fact all cars should keep one in them) but with my fleet it would be cost prohibitive to outfit all of them... Thinking the '95 and '93 since both are lightly to highly modified should probably have these in them...