Koni Shocks - Blow out sale - 928sRus
#16
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
I have a limited number of sets of Koni shocks for $560 plus shipping.
As always first come first served - order by email only to Roger@928sRus.com
I screwed up the Bilstein market so lets see if I can do the same for the Koni market
As always first come first served - order by email only to Roger@928sRus.com
I screwed up the Bilstein market so lets see if I can do the same for the Koni market
__________________
Your Porsche Parts Superstore
Parts | Tech-Session | Facebook | Youtube
Jason Burkett
Paragon Products - Porsche Parts & Accessories*- 800.200.9366
Tech Session - Porsche Tech & Info*- 361.289.8834
jason@paragon-products.com
Your Porsche Parts Superstore
Parts | Tech-Session | Facebook | Youtube
Jason Burkett
Paragon Products - Porsche Parts & Accessories*- 800.200.9366
Tech Session - Porsche Tech & Info*- 361.289.8834
jason@paragon-products.com
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I Like a challenge - Price reduced to $550 and free ground shipping in the Continental USA.
What are you going to do about that Chuck & Jason
What are you going to do about that Chuck & Jason
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#22
Rennlist Member
And when one of those sponsers offers net 15 from a phone order, develops a new 928 specific intake, drives creation of vendor alliances that result in a new block-protecting water pump or a specially reinforced timing bely for superchsarger applications, or even generelly knows WtF a 928 is, there might be a real choice mon frere.
#24
Rennlist Member
It's just a hex bit put in a long T handled shaft (measures about 19"). Takes two different ones to get front vs rear (5mm and 6mm-why, I don't know). Also helps if you weigh about 300 lbs.
#25
Amen.
And when one of those sponsers offers net 15 from a phone order, develops a new 928 specific intake, drives creation of vendor alliances that result in a new block-protecting water pump or a specially reinforced timing bely for superchsarger applications, or even generelly knows WtF a 928 is, there might be a real choice mon frere.
#26
Hi Roger,
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
#27
Hi Roger,
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
#28
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#29
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Hi Roger,
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
Will the KONI's reds work on a 93 GTS ?
The price is for a set of four? Forgive if sounds tad silly of a question.
I am looking to replicate the original ride quality as it was in 93 when it left the factory.
Please advise if I should be ordering red or yellows.
I will be at SITP2012 if that helps or save some of the shipping cost on your part.
Thank you
Steve
#30
Hmmmm