Lower Outer Window Seals - Installation Testing
02-21-2012, 01:33 PM
#61
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Package of seals has not arrived as of today. Once they are here I will sending them out to the three test fitters.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
02-22-2012, 06:17 PM
#62
Rennlist Member
I'll buy some ... add me to the list!
03-18-2012, 03:33 PM
#65
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The seals arrived and look very very good. I am over in the UK taking care of some family issues and will be back in about 10 days.
Once I am back I will ship the trial sets.
Once I am back I will ship the trial sets.
04-19-2012, 11:04 AM
#66
Rennlist Member
There in!
I now have both seals installed and wanted to report. These seals are fantastic!! The fit is perfect. I have made a video that I will try to load to youtube within the next couple of days.
Basically, I removed the door panel, which although is probably not required, made installing the seals a breeze. This is an extremely easy job once the door panel and inner seal is out of your way. You have lots of room to pop the new seal in, and slide it past the window moving from the mirror to the door lock side. The inner window seal pops right off, it is not glued on. Here are some pictures, I do not have a close up of each end. You must trim the one end (the door lock end) to fit, but this is easy as well with a sharp razor blade.
Basically, I removed the door panel, which although is probably not required, made installing the seals a breeze. This is an extremely easy job once the door panel and inner seal is out of your way. You have lots of room to pop the new seal in, and slide it past the window moving from the mirror to the door lock side. The inner window seal pops right off, it is not glued on. Here are some pictures, I do not have a close up of each end. You must trim the one end (the door lock end) to fit, but this is easy as well with a sharp razor blade.
04-19-2012, 02:25 PM
#72
Count me in.
04-19-2012, 02:34 PM
#73
Rennlist Member
Add my name to the list, please.
