Just Peachy OB project
#647
Decided to bypass the flap position slider switch. Installed a small on/off switch to activate the A/C compressor into the seat belt warning opening. This now allows the user to run both the upper and lower vents simultaneously. Fixed up the side panels WIT. T
Last edited by 77tony; 07-21-2014 at 01:02 AM.
#648
Rob Budd said he had just enough of this color combo to cover one seat cushion, so off it went. Also removed the pass side seat and plan to insulate under the front seats and rear foot wells a bit more. T
#649
Somewhat disappointed when I found out that the black/brown pascha is nowhere to be found. Going with plan b. Pulled the rear seats out to make the repair to the front seat and will be doing a rear seat delete. Picked up a used Mazda RX7 cargo box to install behind the drivers seat (similar mod that Jim M has done). WIIT, will be stepping up the sound system a bit. 10" JL sub behind the pass seat and Focal components up front, all fed by a JBL 3 channel amp. Really need more fill sound to combat our noisy TX highways and this should do it. T
Last edited by 77tony; 08-24-2014 at 08:52 PM.
#653
Thanks guys. Local upholsterer fabbed up a slick little shifter boot and patched the front cushion for now. These seats will eventually make there way to Rob Budd to be recovered in black/tan pascha that's still available. T
Last edited by 77tony; 08-06-2014 at 12:19 PM.
#658
M.J. ebay listing says all 86-91 RX7's. T
#660
They are not as big as the area below. I removed the flexible bag and cut out most of the plastic on the unit behind the pass seat to allow room for a subwoofer box. Also removed just the bag behind the drivers side to allow more room below. They also have a light inside triggered when the trap door is opened up. I used the power from the rear cig lighter that's not there anymore. Credit goes to Jim M for a very similar RX7 cargo box install he performed on his GTS a few years back. T