Blown headgasket, time to get dirty
#136
Burning Brakes
Thread Starter
Join Date: Oct 2006
Location: Bakersfield, Ca.
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
Well it's done. Took it to be smogged yesterday, and it passed. Man points earned!! I can't thank you guys enough for all the help and input, AND patients. Absolutely inbvaluable!!
I couln't have done it without you. THANK YOU!!!
It's still runnung a bit rough at idle, and when cold, but some tweeking should taker care of that. Plus I think the idle is set a bit high. I plan to get a new distributor cap and rotor, that should help a little.
Also it runs a little hot. I have a gut feeling my thermostat may be toast from all the crap run through it. I am going to replace that as well, if for anything to eliminate that as a problem, and it's probably due.
I couln't have done it without you. THANK YOU!!!
It's still runnung a bit rough at idle, and when cold, but some tweeking should taker care of that. Plus I think the idle is set a bit high. I plan to get a new distributor cap and rotor, that should help a little.
Also it runs a little hot. I have a gut feeling my thermostat may be toast from all the crap run through it. I am going to replace that as well, if for anything to eliminate that as a problem, and it's probably due.