85 to 95 Cam Gears 928 105 530 01 NLA - Update
#316
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Really? I thought that avenue was closed:
https://rennlist.com/forums/8166546-post269.html
Dan
'91 928GT S/C 475hp/460lb.ft
https://rennlist.com/forums/8166546-post269.html
Dan
'91 928GT S/C 475hp/460lb.ft
Judging by everything else he makes I can image the price will be very reasonable and the quality will far exceed OEM.
#317
Is Mike Simard a figment of my imagination or something?? He posted three times in this thread that he has the ability to produce these gears......in house.
Judging by everything else he makes I can image the price will be very reasonable and the quality will far exceed OEM.
Judging by everything else he makes I can image the price will be very reasonable and the quality will far exceed OEM.
Thanks Hacker, Like I said I didn't have time to look through the whole 20 pages so I didn't see that Mike responded. Good problem solved !
Next!
#318
Rennlist Member
Including using hydrogen.
Ok..I fill up at the San Jose Airport, and im headed for Denver.
Will I make it?
Could I get to Reno, NV and back?
There is close to zero distribution system out there for an H fueled population..its worse than an electric hybrid..because if you forget to plug in..or the batteries run out, you still have an engine, with a gas station from here to forever across the planet.
The world works on practical solutions, and Hydrogen is not yet practical. However Popular Mechanics has been promising "..20 more years!" for Hydrogen, since the 50s.
#321
Rennlist Member
Dang..ya..forgot that part.
Then..theres no problem to begin with..right?
When you compare the previous replace-continually for a lifetime of high gear cost, or now replace one and forget it...just finding the best deal..is the only "problem".
Then..theres no problem to begin with..right?
When you compare the previous replace-continually for a lifetime of high gear cost, or now replace one and forget it...just finding the best deal..is the only "problem".
#322
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Patience grasshopper – nearly there.
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission? George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
#323
Patience grasshopper – nearly there.
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
#324
Former Vendor
#327
Rennlist Member
Patience grasshopper – nearly there.
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
I would like to get an initial set on a daily driver that clocks up some miles as a test mule. That way we can check on potential issues ahead of the pack. Suggestions on a stamped address envelope to 982sRus. Email me if interested at roger@928sRus.com.
I have sold 4 sets of the Porsche new cam gears to those were in a hurry. More in stock if you need them. If you have to ask the price you need to be patient 8>).
Update?
#329
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
I have installed two sets, and it is far to early to tell, like other timing belt parts, having five cars go a total of 100,000 miles is no where near the test of having five cars go 100,000 miles each, and even at five cars, that is a very small number for a test.