Fully Formed Spare Tire Covers
05-30-2013 | 09:57 PM
#63
Rennlist Member
Joined: May 2008
Posts: 6,686
Likes: 621
From: 2706 Skyline Drive, Grand Junction CO 81506
Jerry, how about a thread with pictures showing all your designs that are available?
Oakley Sunglasses
Oakley Sunglasses
05-30-2013 | 10:13 PM
#64
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Mar 2010
Posts: 745
Likes: 97
I was going to work on the suggested thread, but find that too many of my pictures are too dense and need to be retaken with a different density. Too, I find that the Goodrich ad that appears on my computer in this forum is precluding me from using the back arrow to get back to a previous page which requires me to have to leave the Forum each time I need to go back and then re-enter and start over. Does anyone else have that same problem?
__________________
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
05-30-2013 | 11:56 PM
#66
Drifting
Joined: Oct 2012
Posts: 2,157
Likes: 3
From: Fort Wayne IN.
Yes, I finally did. I took the one out of my S4 that we made when we did the interior and here are a couple of pictures of it. It is basically a piece of ABS Plastic with two straight bends in it. It is then covered with carpet and we put a little sort of leather foot pad on it to kind of coordinate with the dead foot rest on the divers's side. It is held in with a strip of velcro as shown which mates to the strip on the side where the leather strip with the snap is mounted.
I would think that this is something that just about anyone could make for themselves.
Thanks
05-31-2013 | 01:17 AM
#67
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Mar 2010
Posts: 745
Likes: 97
PM me your address and I'll make you one tomorrow. Also, what color is your interior?
05-31-2013 | 01:20 AM
#68
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Mar 2010
Posts: 745
Likes: 97
05-31-2013 | 09:27 AM
#69
Rennlist Member
Joined: May 2008
Posts: 6,686
Likes: 621
From: 2706 Skyline Drive, Grand Junction CO 81506
05-31-2013 | 07:10 PM
#70
Rennlist Member
Joined: May 2008
Posts: 6,686
Likes: 621
From: 2706 Skyline Drive, Grand Junction CO 81506
Here is are a couple of pictures of yours. I went ahead and covered it with black leather and made the pad out of gray. I hope it matches. If not, you can easily strip it and cover it to suit yourself. I did most of this myself, all but the stitching, so I give it only about a B plus. I hope it works.
05-31-2013 | 07:24 PM
#72
Drifting
Joined: Oct 2012
Posts: 2,157
Likes: 3
From: Fort Wayne IN.
Here is are a couple of pictures of yours. I went ahead and covered it with black leather and made the pad out of gray. I hope it matches. If not, you can easily strip it and cover it to suit yourself. I did most of this myself, all but the stitching, so I give it only about a B plus. I hope it works.
Let me know what I owe you my friend.
MJ
05-31-2013 | 07:33 PM
#73
Rennlist Member
Joined: May 2008
Posts: 6,686
Likes: 621
From: 2706 Skyline Drive, Grand Junction CO 81506
05-31-2013 | 07:42 PM
#74
Drifting
Joined: Oct 2012
Posts: 2,157
Likes: 3
From: Fort Wayne IN.
