In-car quick release fire extinguisher bracket (Possible Group Buy)
#63
Burning Brakes
Don't know how I missed this one. I'd also be interested. I bought one from Stable Energies a few years ago and it didn't fit my power seat. I was going to try to make a bracket to adapt it so it will work, but this would be better.
#67
Rennlist Member
Thread Starter
I did a one-off prototype, which turned out pretty good.
Were the project stalled was not having enough money for futher development. Buying three more 928s will do that to ya.
I'd like to light this one up again, because it was so close. Give me a month to see what I can do.
Thanks for you're prolonged continued interest!
PS. Did I post up pics here of the finished piece?
Were the project stalled was not having enough money for futher development. Buying three more 928s will do that to ya.
I'd like to light this one up again, because it was so close. Give me a month to see what I can do.
Thanks for you're prolonged continued interest!
PS. Did I post up pics here of the finished piece?
#69
Rennlist Member
Thread Starter
I could design it to work with one or two common quick-release FE's... and if you wanted to use something different, you could just fab up an adpater.
#70
Rennlist Member
Thread Starter
Are ya'll looking to use quick release mounts like...
Brey Krause:
Or
Safecraft:
Or
Off Road Solutions:
Or
Just want the bracket, will work up my own adapter, bracket, and FE
Brey Krause:
Or
Safecraft:
Or
Off Road Solutions:
Or
Just want the bracket, will work up my own adapter, bracket, and FE
#72
backseat floor using the holes for the stock restraining bracket. Not sure how fast I'm going to be able to get my hands on it in an emergency but looks good, isn't in the way and the mounting is solid as a rock although there is a small rattle from the pin
#73
Burning Brakes
#74
Rennlist Member
Thread Starter
Moving forward toward group buy
Alright, I have most everything in place to move forward.
What I'm looking for is a +1 from interested people. Need at least 15 people to make this happen.
This will include my bracket design along with the Safecraft billet mount.
Will fit Safecraft model PC, or other 2.5# FE's w/ 3" diameter (or slightly smaller).
If you want Safecraft's model PD, we'll have to talk about it.
Otherwise, you can pick up an FE from a your favorite source.
Like I said, just lookin' for +1's. No commitment needed at this point.
Following this, I'll light up a group buy which will include pricing.
Thanks!
NOTE: This bracket will only work with the '85-later power seat
What I'm looking for is a +1 from interested people. Need at least 15 people to make this happen.
This will include my bracket design along with the Safecraft billet mount.
Will fit Safecraft model PC, or other 2.5# FE's w/ 3" diameter (or slightly smaller).
If you want Safecraft's model PD, we'll have to talk about it.
Otherwise, you can pick up an FE from a your favorite source.
Like I said, just lookin' for +1's. No commitment needed at this point.
Following this, I'll light up a group buy which will include pricing.
Thanks!
NOTE: This bracket will only work with the '85-later power seat
Last edited by Jadz928; 05-30-2013 at 09:51 AM.