Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Lug Nut Recommendations?

Thread Tools
 
Search this Thread
 
Old 04-29-2010, 12:24 AM
  #1  
CaseyH
Pro
Thread Starter
 
CaseyH's Avatar
 
Join Date: Aug 2006
Location: Billings, MT
Posts: 555
Likes: 0
Received 0 Likes on 0 Posts
Default Lug Nut Recommendations?

It's getting to be that time of year again...nice enough to put on my summer wheels, and I can't bear to keep using the same old lug nuts. I need to get a new set...but it's hard to tell what's a good set and what isn't.

I was looking at this set: http://www.tulipcitywheels.com/tcwst..._detail&p=1365, mainly because the $80 price sounds pretty nice. It looks like if I get them from Pelican Parts I'll be spending a little over $100, which is still pretty reasonable.

So, where does everybody else get their lug nuts?

Thanks
Old 04-29-2010, 12:38 AM
  #2  
pcar928fan
Nordschleife Master
 
pcar928fan's Avatar
 
Join Date: Apr 2008
Location: Austin, TX
Posts: 9,337
Likes: 0
Received 4 Likes on 4 Posts
Default

I have an old pair of nuts that I lug around... oh, wait, that is different!
Old 04-29-2010, 12:42 AM
  #3  
Ducman82
 
Ducman82's Avatar
 
Join Date: Nov 2009
Location: Marysville WA
Posts: 6,983
Received 18 Likes on 11 Posts
Default

aw SNAP SON@!
Old 04-29-2010, 01:16 AM
  #4  
pcar928fan
Nordschleife Master
 
pcar928fan's Avatar
 
Join Date: Apr 2008
Location: Austin, TX
Posts: 9,337
Likes: 0
Received 4 Likes on 4 Posts
Default

Yea, I am a 12 year old stuck in a 45 year old dudes body....really sucks too!
Old 04-29-2010, 02:30 AM
  #5  
James Bailey
Addict
Lifetime Rennlist
Member
 
James Bailey's Avatar
 
Join Date: Feb 2009
Posts: 18,061
Likes: 0
Received 8 Likes on 6 Posts
Default

Casey what is wrong with your old nuts ? If you just do not like how they LOOK , spray paint them ! Morrison has been doing that for years......last I heard they were Blue !
Old 04-29-2010, 02:33 AM
  #6  
pcar928fan
Nordschleife Master
 
pcar928fan's Avatar
 
Join Date: Apr 2008
Location: Austin, TX
Posts: 9,337
Likes: 0
Received 4 Likes on 4 Posts
Default

That is for damn sure...about to fall off due to lack of use!
Old 04-29-2010, 09:58 AM
  #7  
911tracker85
Rennlist Member
 
911tracker85's Avatar
 
Join Date: Nov 2008
Location: Park Hills, KY
Posts: 807
Likes: 0
Received 0 Likes on 0 Posts
Default

I used fine sand paper, sanded the top that shows. then polished. look great. sorry I don't have a pic.
Old 04-29-2010, 03:57 PM
  #8  
CaseyH
Pro
Thread Starter
 
CaseyH's Avatar
 
Join Date: Aug 2006
Location: Billings, MT
Posts: 555
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by James Bailey
Casey what is wrong with your old nuts ? If you just do not like how they LOOK , spray paint them ! Morrison has been doing that for years......last I heard they were Blue !
It isn't just that I don't like how they look; they are in really bad shape. I constantly run into problems while removing them, and they keep "gripping" to the inside of my lug wrench.

Sanding them and then painting them would probably fix my problems, but these lug nuts are almost 30 years old; I figure I'm gonna have to get a new set at some point.
Old 04-29-2010, 04:10 PM
  #9  
auzivision
Drifting
 
auzivision's Avatar
 
Join Date: Jun 2006
Location: Indianapolis Area
Posts: 2,707
Received 73 Likes on 39 Posts
Default

Make sure you lube your nuts good... unless you don’t mind a squealing dismount.
Old 04-29-2010, 10:42 PM
  #10  
LeRox
Pro
 
LeRox's Avatar
 
Join Date: Jun 2007
Location: Raleighwood
Posts: 552
Likes: 0
Received 0 Likes on 0 Posts
Default

The chrome set would look good w/ the chrome cover's you have but that may be a bad idea since I've heard the saying...

Something about "sucking the chrome off a trailer hitch"
Old 04-29-2010, 11:20 PM
  #11  
danglerb
Nordschleife Master
 
danglerb's Avatar
 
Join Date: Oct 2006
Location: Orange, Cal
Posts: 8,575
Received 3 Likes on 3 Posts
Default

I bought a nice used set from 928Intl, and a new set from Vertex, but for some reason have not used them, perhaps due to Al instead of Mg. Eventually I plan to pick up a set of open, see the threads, steel for track use.

Vertex does sell a nice soft inside lug socket.
Old 04-30-2010, 12:26 AM
  #12  
Stylemobile
Racer
 
Stylemobile's Avatar
 
Join Date: Jan 2008
Location: Allentown, PA
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
Default

I bought a chromed steel set on ebay. Unless someone can point out a good reason why this was a bad idea, I have had the wheels off and on several times and am thoroughly satisfied with the look, performance and 2 pound weight gain.
Old 04-30-2010, 08:35 PM
  #13  
CaseyH
Pro
Thread Starter
 
CaseyH's Avatar
 
Join Date: Aug 2006
Location: Billings, MT
Posts: 555
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for some of the ideas guys.

Do keep in mind though that my summer wheels are Carrera IIIs. My current lug nuts definitely don't do them justice haha.
Old 04-30-2010, 10:33 PM
  #14  
LeRox
Pro
 
LeRox's Avatar
 
Join Date: Jun 2007
Location: Raleighwood
Posts: 552
Likes: 0
Received 0 Likes on 0 Posts
Default

Another reason to go w/ the crome nuts.... they look great on CIII's

Attachment 438684

bty...love Jim's CIII's pic....

























ii

Last edited by LeRox; 07-07-2013 at 02:20 PM.
Old 04-30-2010, 11:10 PM
  #15  
cold_beer839
Rennlist Member
 
cold_beer839's Avatar
 
Join Date: Feb 2008
Location: Lillington, NC
Posts: 2,742
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by LeRox
Another reason to go w/ the crome nuts.... they look great on CIII's
Did you ever get a set of the CIII's?

BTW, I put the chrome steel lug nuts on my car, the aluminum lugs are a problem waiting to happen.


Quick Reply: Lug Nut Recommendations?



All times are GMT -3. The time now is 02:30 AM.