928 block with no serial #
#16
Three Wheelin'
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 5 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So if you cut the stamp section of a 5.0L and then placed the number cut off a 4.5L on with some JB Weld and paint...so you can race in a lower class...that would be bad?
#17
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Nov 2006
Location: On my blackberry
Posts: 3,753
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Stamping numbers into a blank block with "supposedly" the old engine number isn't proper or legal in most states. This is to protect future buyers from buying a car that might be a frankencar made up of different parts from a chop shop operation. Unfortunately chop shop operations are still around and doing a good business.
These stringent motor vehicle laws have also given fits to kit car builders in many states. But they are in place to protect consumers like you. As with every law, there will be proponents and detractors of them.
HTH,
Constantine
These stringent motor vehicle laws have also given fits to kit car builders in many states. But they are in place to protect consumers like you. As with every law, there will be proponents and detractors of them.
HTH,
Constantine
Last edited by Black Sea RD; 05-02-2009 at 07:38 AM.
#20
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
All replacement engines should have a "DOT" stamp, with a Porsche triangle, for use in this country....and that stamp may not be in this area!
Anything that is smooth and has no numbers is very suspect...don't let the California Highway Patrol see it!
Post pictures of your non-marked blocks. Love to see the variants.
#21
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I bet people have been charged with that at some point.
I know a guy that bought a Corvette engine that was replaced with a race motor, the car was stolen soon after that.
The guy I know gets checked at a random roadblock and his motor comes up as stolen......................
It was a big deal to get that all straight.
The reason I am telling this is to show that however unlikely, you can get checked.
I would keep a copy of the bill of sale for the engine in the car and contact the GA DOT to see what they have to say.
It is hard to do the right thing, it changes from State to State.
I know a guy that bought a Corvette engine that was replaced with a race motor, the car was stolen soon after that.
The guy I know gets checked at a random roadblock and his motor comes up as stolen......................
It was a big deal to get that all straight.
The reason I am telling this is to show that however unlikely, you can get checked.
I would keep a copy of the bill of sale for the engine in the car and contact the GA DOT to see what they have to say.
It is hard to do the right thing, it changes from State to State.
California insists that this area is just "for official use" and if anyone stamps anything there, you are a criminal. Other states don't care. The Germans really don't care. California can make almost anything more complex than it needs to be!
All replacement engines should have a "DOT" stamp, with a Porsche triangle, for use in this country....and that stamp may not be in this area!
Anything that is smooth and has no numbers is very suspect...don't let the California Highway Patrol see it!
Post pictures of your non-marked blocks. Love to see the variants.
All replacement engines should have a "DOT" stamp, with a Porsche triangle, for use in this country....and that stamp may not be in this area!
Anything that is smooth and has no numbers is very suspect...don't let the California Highway Patrol see it!
Post pictures of your non-marked blocks. Love to see the variants.
#22
In Your Face, Ace
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
California insists that this area is just "for official use" and if anyone stamps anything there, you are a criminal. Other states don't care. The Germans really don't care. California can make almost anything more complex than it needs to be!
All replacement engines should have a "DOT" stamp, with a Porsche triangle, for use in this country....and that stamp may not be in this area!
Anything that is smooth and has no numbers is very suspect...don't let the California Highway Patrol see it!
Post pictures of your non-marked blocks. Love to see the variants.
All replacement engines should have a "DOT" stamp, with a Porsche triangle, for use in this country....and that stamp may not be in this area!
Anything that is smooth and has no numbers is very suspect...don't let the California Highway Patrol see it!
Post pictures of your non-marked blocks. Love to see the variants.
![](http://forums.rennlist.com/upload/may2009_023.jpg)
There was a part number on the front of the block just to the upper left of the water pump. Not sure if this is different from a 'normal' block.
![](http://forums.rennlist.com/upload/may2009_024.jpg)
#23
In Your Face, Ace
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I bet people have been charged with that at some point.
I know a guy that bought a Corvette engine that was replaced with a race motor, the car was stolen soon after that.
The guy I know gets checked at a random roadblock and his motor comes up as stolen......................
It was a big deal to get that all straight.
The reason I am telling this is to show that however unlikely, you can get checked.
I would keep a copy of the bill of sale for the engine in the car and contact the GA DOT to see what they have to say.
It is hard to do the right thing, it changes from State to State.
I know a guy that bought a Corvette engine that was replaced with a race motor, the car was stolen soon after that.
The guy I know gets checked at a random roadblock and his motor comes up as stolen......................
It was a big deal to get that all straight.
The reason I am telling this is to show that however unlikely, you can get checked.
I would keep a copy of the bill of sale for the engine in the car and contact the GA DOT to see what they have to say.
It is hard to do the right thing, it changes from State to State.
#24
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Lots of the parts have "casting numbers" that are not part numbers. That's what you see. Perhaps it could be tracked to a year of production or planned size for the engine.
On mine the boss looks is not machined at all. Just a smooth cast surface like most of the outside of the block.
On mine the boss looks is not machined at all. Just a smooth cast surface like most of the outside of the block.
#25
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
You might might want to just ignore this whole issue/remove this entire thread and move on....involving any state agency might create more issues than you want to deal with. Ignorance is sometimes bliss...this might be one of those times!
#26
In Your Face, Ace
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That doesn't look like any other that I've ever seen...is it as tall as the others pictured in this thread? I can guarantee that the Califonia Highway Patrol auto theft people would take your car away and try to "raise" an old number, from this area.
You might might want to just ignore this whole issue/remove this entire thread and move on....involving any state agency might create more issues than you want to deal with. Ignorance is sometimes bliss...this might be one of those times!
You might might want to just ignore this whole issue/remove this entire thread and move on....involving any state agency might create more issues than you want to deal with. Ignorance is sometimes bliss...this might be one of those times!
That's why I'd never live in Kalifornia..lol
I got the block from Anderson, so I'd just sell him out it there was any sign of trouble
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
There were never numbers on the block. It was a training block he got from Porsche and was in new condition when I got.
Last edited by Abby Normal; 05-02-2009 at 05:31 PM.
#27
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here is my factory new block. No numbers and the area where they would go has the same rough cast texture as the rest of the outside of the block.
![Name: BlockSN.JPG
Views: 177
Size: 109.1 KB](https://rennlist.com/forums/attachments/928-forum/356008d1241295682-928-block-with-no-serial-blocksn.jpg)
#28
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Roll over on Mark like a puppy would ya. ![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
You block looks like the pad has been machined, Karl's looks as cast.
I really do not think it is going to be a big deal here in Georgia.
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
You block looks like the pad has been machined, Karl's looks as cast.
I really do not think it is going to be a big deal here in Georgia.
#29
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Surface where engine number is stamped was changed from cast to machined some time in eighties. Casting was raised higher and when top of block was machined also number surface got automatically machined to same level as rest of the block. This means its possible to know if number is correct on early block simply by checking that surface is cast. On later block surface must be at exact same level as blocks top and machining tracks must align with surrounding block top areas. Thus on both variations there are ways to see if number has been changed. Or at least its very difficult to change number well enough for everything to indicate it hasn't been changed.
#30
Former Vendor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As I said, the Germans do whatever they want. If you crash a Cup Car and want a new "tub", they make you cut out the chassis number, send it back to Germany, and they weld it into the "new" tub. That is strickly not done, in this country....a new tub would have a new vin! The Germans simply do not care about these trivial details.
A "school" engine block would indeed have an interesting tale to tell. Did it come out of a car that had an engine problem at the factory? Did it come off the engine assembly line? Was it ever on a line? Was it part of the contact with the manufacturer to supply "school" blocks? Who knows.
Try and raise some numbers...there should be instructions on which acid to use, on the internet. Maybe there are some, maybe not....sure would be fun to find out.