FS Dual Snorkel Intake
#16
Craic Head
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#17
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
FYI, this part might be a perfect match for the 85-86 and your new setup.
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
![](http://www.928gt.com/images/928Specialists-COVER3-928GTcom.png)
Last edited by DR; 11-29-2011 at 06:23 PM.
#18
Craic Head
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#19
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I think they are about $30 last I checked. Requires a little trimming of the lower 1/2" to fit the 928 MAF. But once you do that you can use the original rubber coupler between the MAF and your Factory Air Box to attach it. VERY EASY! Outlet ID would be perfect for the smaller diameter 85-85 air Tubes needed to clear the intake.
Last edited by DR; 03-09-2009 at 11:51 AM.
#20
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mike,
Good catch. I have the same intake on order from John Kuhn. Mine is going on an Eaton SC so, as DR said, a little modification will be necessary. Right know I am working on a fiberglass plenum that will sit right behind the radiator. I will be anxious to compare our installs.
Good luck, Ralph
Good catch. I have the same intake on order from John Kuhn. Mine is going on an Eaton SC so, as DR said, a little modification will be necessary. Right know I am working on a fiberglass plenum that will sit right behind the radiator. I will be anxious to compare our installs.
Good luck, Ralph
#21
Craic Head
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mike,
Good catch. I have the same intake on order from John Kuhn. Mine is going on an Eaton SC so, as DR said, a little modification will be necessary. Right know I am working on a fiberglass plenum that will sit right behind the radiator. I will be anxious to compare our installs.
Good luck, Ralph
Good catch. I have the same intake on order from John Kuhn. Mine is going on an Eaton SC so, as DR said, a little modification will be necessary. Right know I am working on a fiberglass plenum that will sit right behind the radiator. I will be anxious to compare our installs.
Good luck, Ralph
Mine will be nothing like yours, since mine is going to remain NA for now, so basically stock (with a few other mods in place
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
I would like to see how you deal with it though.
#25
Craic Head
Lifetime Rennlist
Member
Lifetime Rennlist
Member