86.5 custom exhausts F/S
#1
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hey all,
We've got a local 928 owner (PacNW) who doesn't have internet access..Anyway...he is selling off some of his custom 86.5 exhaust parts..that he acquired along the way. Here's the list of parts..if anyone is interested..send me a pm..and I'll forward the contact number..
HEADERS,DEVEK LEVEL 2,ceramic coated silver,for 32 valve.only 8,000
miles on them.excellent condition,$600. obo. cost me $995. I have receipt.
3 INCH CUSTOM DUAL EXHAUST,stainless steel,made by Fordahl Motorsports
in Bellevue,WA.Has mandrell bent pipe,flowmaster delta flow
mufflers,polished stainless steel exhaust tips.Less than 2,000 miles on
it.Excellent condition,$700. obo. Cost me 1268. I have receipt.
3 INCH DEVEK CUSTOM CATALYTIC CONVERTER SET UP WITH AIR PIPE.
Has 2 round high flow catalytic converters (Ceramic Substrate).Only 8,000 miles on it.Excellent
condition,$400. Cost me $850. I have receipt.
2.5 INCH CUSTOM DUAL EXHAUST,stainless steel,made by Stan's header and
muffler shop in Auburn,WA.Has mandrell bent pipe,borla stainless steel
mufflers and borla polished stainless steel exhaust tips.Less than
3,000 miles on it.Excellent condition,$700. obo. Cost me $1256. I have
receipt.
BTW..This owner has a White 86.5..no sunroof...no rubstrips..5 spd....lsd...black leather interior, rebuilt motor by Devek and now is running a Lomas X pipe into stock pipes back... If I were looking for a 86.5....this would be the one
. too bad he's not selling the car
LOL.
We've got a local 928 owner (PacNW) who doesn't have internet access..Anyway...he is selling off some of his custom 86.5 exhaust parts..that he acquired along the way. Here's the list of parts..if anyone is interested..send me a pm..and I'll forward the contact number..
HEADERS,DEVEK LEVEL 2,ceramic coated silver,for 32 valve.only 8,000
miles on them.excellent condition,$600. obo. cost me $995. I have receipt.
3 INCH CUSTOM DUAL EXHAUST,stainless steel,made by Fordahl Motorsports
in Bellevue,WA.Has mandrell bent pipe,flowmaster delta flow
mufflers,polished stainless steel exhaust tips.Less than 2,000 miles on
it.Excellent condition,$700. obo. Cost me 1268. I have receipt.
3 INCH DEVEK CUSTOM CATALYTIC CONVERTER SET UP WITH AIR PIPE.
Has 2 round high flow catalytic converters (Ceramic Substrate).Only 8,000 miles on it.Excellent
condition,$400. Cost me $850. I have receipt.
2.5 INCH CUSTOM DUAL EXHAUST,stainless steel,made by Stan's header and
muffler shop in Auburn,WA.Has mandrell bent pipe,borla stainless steel
mufflers and borla polished stainless steel exhaust tips.Less than
3,000 miles on it.Excellent condition,$700. obo. Cost me $1256. I have
receipt.
BTW..This owner has a White 86.5..no sunroof...no rubstrips..5 spd....lsd...black leather interior, rebuilt motor by Devek and now is running a Lomas X pipe into stock pipes back... If I were looking for a 86.5....this would be the one
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Last edited by Tom. M; 07-25-2008 at 12:34 PM.
#2
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Any pictures on the exhausts? Its difficult to understand how they may have routed stuff.
#3
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I will check and see if there are photo's. just an FYI..another lister has the same Forhdahl stainless exhaust on his mint 88... He (Forhdahl) does good work ...even though it is a bit pricey...
#4
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The reason I ask is that I was planning on doing a custom stainless exhaust, but I have some different routing needs near the gas tank area.
#5
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
my understanding from talking to him is that they follow the stock 86.5 routing.....that I believe is the same until you get to the rear muffler
Not sure if one can just bolt a 87+ muffler on to it and call it good though?? anyone know?
Not sure if one can just bolt a 87+ muffler on to it and call it good though?? anyone know?
Trending Topics
#8
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yep..he had it dyno'd after the rebuild (it was just a stock rebuild..nothing fancy) and didn't have super numbers like he was led to believe. He checked with us..and spoke with Dave Lomas and pretty much when to stock manifolds and xpipe. Looks like the xpipe and stock manifolds is still the best bang for the buck..at least for stock or mildly modified motors
#10
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I haven't had issues contacting him. Just keep trying..I'm sure he'll call you back..but he may also be busy as this post generated a lot of response...
#11
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm posting these pictures for Tom M. on behalf of the owner of the parts "Carl"
Carl sent me these 35mm 3x5's in the snail mail so I could I.D. them, I can't use
them for my custom project but thought they would be a perfect upgrade for the stroker / boosted crowd . The 3'' catalytic convertor's are made by Random
Technologies ( ceramic core ) That whole assemble with X was made by Devek
to fit the 85-86 cars. It also has the warm up tube installed, ready to bolt right
into place. Carl said he only put 3K miles on that set up, It is practically new &
at a price of $400.00 it is a heck of a good deal for someone. The rest of the
stuff Tom M. has already given a description of . Carl can be reach through
Tom M. , just as he has originally set up this thread in the begining. I'm just
trying to help by supplying some pictures, the post started without pictures &
now that the parts are viewable you guys should take a second look at this stuff
there are some pretty good values in there...
![Name: ~MAP0000.jpg
Views: 182
Size: 264.6 KB](https://rennlist.com/forums/attachments/928-forum/292364d1216671887-86-5-custom-exhausts-f-s-map0000.jpg)
![Name: ~MAP0001.jpg
Views: 191
Size: 258.6 KB](https://rennlist.com/forums/attachments/928-forum/292365d1216671898-86-5-custom-exhausts-f-s-map0001.jpg)
![Name: ~MAP0002.jpg
Views: 179
Size: 206.1 KB](https://rennlist.com/forums/attachments/928-forum/292366d1216671907-86-5-custom-exhausts-f-s-map0002.jpg)
Carl sent me these 35mm 3x5's in the snail mail so I could I.D. them, I can't use
them for my custom project but thought they would be a perfect upgrade for the stroker / boosted crowd . The 3'' catalytic convertor's are made by Random
Technologies ( ceramic core ) That whole assemble with X was made by Devek
to fit the 85-86 cars. It also has the warm up tube installed, ready to bolt right
into place. Carl said he only put 3K miles on that set up, It is practically new &
at a price of $400.00 it is a heck of a good deal for someone. The rest of the
stuff Tom M. has already given a description of . Carl can be reach through
Tom M. , just as he has originally set up this thread in the begining. I'm just
trying to help by supplying some pictures, the post started without pictures &
now that the parts are viewable you guys should take a second look at this stuff
there are some pretty good values in there...
![Name: ~MAP0000.jpg
Views: 182
Size: 264.6 KB](https://rennlist.com/forums/attachments/928-forum/292364d1216671887-86-5-custom-exhausts-f-s-map0000.jpg)
![Name: ~MAP0001.jpg
Views: 191
Size: 258.6 KB](https://rennlist.com/forums/attachments/928-forum/292365d1216671898-86-5-custom-exhausts-f-s-map0001.jpg)
![Name: ~MAP0002.jpg
Views: 179
Size: 206.1 KB](https://rennlist.com/forums/attachments/928-forum/292366d1216671907-86-5-custom-exhausts-f-s-map0002.jpg)
![Name: ~MAP0003.jpg
Views: 178
Size: 157.0 KB](https://rennlist.com/forums/attachments/928-forum/292367d1216671916-86-5-custom-exhausts-f-s-map0003.jpg)
#12
Deleted
Rennlist Member
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Bump..updated the pricing....Joe posted some pics above... Cats are back in the list....Joe wanted metal core substrate...and Carl's are ceramic substrate (Random Technologies).