X-pipe for headers?
#49
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
yeah..you caught me.
I was thinking that left pipe could use lose about an inch. I left it for now thinking I may cut them both back and add a slight bend that aims the tips more to the rear instead of the sides. I need to stand back and look at it in the day light.
I was thinking that left pipe could use lose about an inch. I left it for now thinking I may cut them both back and add a slight bend that aims the tips more to the rear instead of the sides. I need to stand back and look at it in the day light.
#50
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a fuel cell mounted in the center of the rear section so I have room on both sides of the car to run an exhaust pipe ( no stock gas tank in the way). I'm going to cut the body on the passenger side to match the factory cut-out of the driver's side. This car is still street registered so I want to have some chance of getting an inspection sticker.
#52
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 5 Likes
on
3 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Exhausts are much like breast, they are seldom truly simetrical.
I think most of us hang our pipe a little more to the left.![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Oh and how would you rate the volume of the Dynatech's? I have FM Delta 50's now and they are a good bit larger, very loud, but nice deep mellow tone until WOT. Those fit so nice.
I think most of us hang our pipe a little more to the left.
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
Oh and how would you rate the volume of the Dynatech's? I have FM Delta 50's now and they are a good bit larger, very loud, but nice deep mellow tone until WOT. Those fit so nice.
#53
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Mounting: completely chopped out the rear floor, bat. box and spare tire well. Replaced with a welded in flat section that has a fuel cell shaped hole in it. The edges of the cell-hole have bent flange edges and a tacked in 1/4" x 1/2" bar that is drilled and tapped for all of the bolts shown.
#54
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyway, just a thought.
#56
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dave it is all very nice.
I hope this is not wrong to ask, but how much cash does I guy have to have to put a car like that together.
That can not be cheap to build such a nice car.
Looks top notch all the way.
I hope this is not wrong to ask, but how much cash does I guy have to have to put a car like that together.
That can not be cheap to build such a nice car.
Looks top notch all the way.