Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

928 NITROUS TWIN BOTTLE SYSTEM - 28 LBS

Thread Tools
 
Search this Thread
 
Old 05-13-2007, 12:02 PM
  #1  
Brett928S2
Three Wheelin'
Thread Starter
 
Brett928S2's Avatar
 
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like on 1 Post
Default 928 NITROUS TWIN BOTTLE SYSTEM - 28 LBS

Hi All

Here are a couple of pictures of my new twin bottle (14 lbs each) Nitrous system in my 928 S2...






All the best Brett

PORSCHE 928 S2 AUTO V8 4.7 LTR 1986 IRIS METALLIC BLUE WITH X-PIPES ,RMB ,PROMAX CHIPS, KICKDOWN SWITCH, K&N, WIZARDS OF NOS - NITROUS KIT 150 HP JETTING - 505 BHP / 500 FT LBS TORQUE
PCGB UK 928 FORUM MODERATOR - Email managingdirector@pchealthcare.co.uk
Old 05-13-2007, 12:07 PM
  #2  
V2Rocket
Rainman
Rennlist Member
 
V2Rocket's Avatar
 
Join Date: Jan 2007
Location: Nashville, TN
Posts: 45,538
Received 646 Likes on 500 Posts
Default

Beautiful.

I hope to do this to my 944.

Care to get some numbers for us? (if this is new since your signature)
Old 05-13-2007, 12:42 PM
  #3  
drnick
Drifting
 
drnick's Avatar
 
Join Date: May 2002
Location: New Zealand
Posts: 2,777
Likes: 0
Received 2 Likes on 2 Posts
Default

brett, that is so cool....
Old 05-13-2007, 12:42 PM
  #4  
atb
Rennlist Member
 
atb's Avatar
 
Join Date: May 2001
Location: Puyallup, WA
Posts: 4,869
Received 33 Likes on 19 Posts
Default

Holy cow Brett!

You're going to need two chutes, one for the car... and one for you.
Old 05-13-2007, 12:43 PM
  #5  
Brett928S2
Three Wheelin'
Thread Starter
 
Brett928S2's Avatar
 
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like on 1 Post
Default

Hi

When I have finished the front end ((plenum with extremely unusual race system)...it will then run 500 hp of Nitrous or any percentage up to that, that I choose...

So car will be around 850 ish...

Once finished I will dyno it but most Uk dynos cannot handle much more than 700 hp...with any accuracy...

All the best Brett
Old 05-13-2007, 12:51 PM
  #6  
Brett928S2
Three Wheelin'
Thread Starter
 
Brett928S2's Avatar
 
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like on 1 Post
Default

Hi

Another picture...

Front control panel with MAXX EXTREME race controller..G-Tech...fighter pilot type switches etc...



All the best Brett
Old 05-13-2007, 01:38 PM
  #7  
hacker-pschorr
Administrator - "Tyson"
Lifetime Rennlist
Member
 
hacker-pschorr's Avatar
 
Join Date: Aug 2001
Location: Up Nort
Posts: 1,549
Received 2,168 Likes on 1,225 Posts
Default

Here is some competition to shoot for, ZO6 with 1600hp:

http://www.lingenfelter.com/Lingenfe...06ZO6TTBGB.htm
Old 05-13-2007, 02:11 PM
  #8  
Brett928S2
Three Wheelin'
Thread Starter
 
Brett928S2's Avatar
 
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like on 1 Post
Default

Hi

Well I will be doing a standing mile on August 12th...

My calculations say I should get a terminal of around 150 to 190 mph...in 30 to 35 seconds...roughly...

But we will see....lol

All the best Brett
Old 05-13-2007, 02:35 PM
  #9  
mark kibort
Rennlist Member
 
mark kibort's Avatar
 
Join Date: Feb 2003
Location: saratoga, ca
Posts: 29,952
Received 165 Likes on 64 Posts
Default

This is one serious NOS system!

engine bay pics? how was it ported to the engine?

mk
Old 05-13-2007, 03:07 PM
  #10  
IcemanG17
Race Director
 
IcemanG17's Avatar
 
Join Date: Sep 2004
Location: Stockton, CA
Posts: 16,270
Received 75 Likes on 58 Posts
Default

Originally Posted by Hacker-Pschorr
Here is some competition to shoot for, ZO6 with 1600hp:

http://www.lingenfelter.com/Lingenfe...06ZO6TTBGB.htm
Hacker
Lingenfelter makes some sick stuff...1600hp....its gotta have nitrous and some serious boost?
Old 05-13-2007, 03:20 PM
  #11  
Brett928S2
Three Wheelin'
Thread Starter
 
Brett928S2's Avatar
 
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by mark kibort
This is one serious NOS system!

engine bay pics? how was it ported to the engine?

mk
Hi Mark

Still running at engine end on old single port system...but new sort of 8 port direct sytem is being built now...nobody will have seen ANYTHING like it....but knowing Trevor Langfield (owner of Wizards of Nos) helps

I am not sure if I will be allowed to show exact pictures of finalised 8 port system as it WILL be a system that Wizards sell eventually...but it will be fitted into a spare 16 Valve plenum (sort of)

The aim of the system will be to give me variable Nitrous from 0hp to 500hp with various settings in each gear (auto) and mutliple memories for control.

Plus a few other features....that should make the system very very smooth...

All the best Brett
Old 05-13-2007, 03:45 PM
  #12  
V2Rocket
Rainman
Rennlist Member
 
V2Rocket's Avatar
 
Join Date: Jan 2007
Location: Nashville, TN
Posts: 45,538
Received 646 Likes on 500 Posts
Default

I hope you've got some good pistons and rods on there if you want a 500 shot...
Old 05-13-2007, 04:29 PM
  #13  
whitefox
Banned
 
whitefox's Avatar
 
Join Date: Nov 2005
Location: Sarasota, Florida
Posts: 2,121
Likes: 0
Received 1 Like on 1 Post
Default

I believe his engine is stock, and he is using a progressive controller to achieve those numbers.
Old 05-13-2007, 04:45 PM
  #14  
Fabio421
Man of many SIGs
Rennlist Member
 
Fabio421's Avatar
 
Join Date: May 2005
Location: Florida, USA
Posts: 8,722
Received 11 Likes on 5 Posts
Default

Godspeed Brett.
Old 05-13-2007, 05:40 PM
  #15  
V2Rocket
Rainman
Rennlist Member
 
V2Rocket's Avatar
 
Join Date: Jan 2007
Location: Nashville, TN
Posts: 45,538
Received 646 Likes on 500 Posts
Default

Your 928:



Quick Reply: 928 NITROUS TWIN BOTTLE SYSTEM - 28 LBS



All times are GMT -3. The time now is 06:19 PM.