Murf928 G-Tech run 11.49sec @ 132.59 mph 3.79sec 0-60
#32
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 61 Likes
on
35 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's a scan of the company you're keeping from the latest Road & Track.
In my brief scan it looks like the Enzo, Panoz, CGT, and the 911 GT1 are the only ones that beat it. THe cheapest of which is $455k!
In my brief scan it looks like the Enzo, Panoz, CGT, and the 911 GT1 are the only ones that beat it. THe cheapest of which is $455k!
![EEK!](https://rennlist.com/forums/images/smilies/eek.gif)
#33
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Pleased, but not even emotely surprised...........
Woo!
Woo!
#34
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Jan 2003
Location: Green Bay Wisconsin
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Andrew Olson
...until something breaks. ![ooops](https://rennlist.com/forums/graemlins/icon501.gif)
![ooops](https://rennlist.com/forums/graemlins/icon501.gif)
#35
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Jan 2003
Location: Green Bay Wisconsin
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by pmotts
Any idea how much boost? This is a stock internal motor, right?
The motor is virtually a stock motor with the pistons dished out to lower the compression to 8.6:1 There are a lot of other small modifications but that list would get a little tedious to try and lay out here.
I have the JDS Shark Tuner and really need to get it on the car for some testing. I'm sure I have way too much timing advance upstairs which is certainly not helping me.
#38
Burning Brakes
Join Date: May 2006
Location: Portland, Oregon
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
Originally Posted by Tim Murphy
I'm not exactly sure on the boost. There is NO WAY you can look at the boost gauge under full throttle but I would estimate I am around 15-16 psi.
The motor is virtually a stock motor with the pistons dished out to lower the compression to 8.6:1 There are a lot of other small modifications but that list would get a little tedious to try and lay out here.
I have the JDS Shark Tuner and really need to get it on the car for some testing. I'm sure I have way too much timing advance upstairs which is certainly not helping me.
The motor is virtually a stock motor with the pistons dished out to lower the compression to 8.6:1 There are a lot of other small modifications but that list would get a little tedious to try and lay out here.
I have the JDS Shark Tuner and really need to get it on the car for some testing. I'm sure I have way too much timing advance upstairs which is certainly not helping me.
#40
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 61 Likes
on
35 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
OMG!!! Tim just sent me his G-tech file! ![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
Here's his run -vs- my best run which I took to 143. Look at the 0-130 times! He's almost 5 full seconds faster! I can't even imagine what that must be like! Super job, Murph! But I think you could do better. Looking at the RPM scale, you didn't even rev it to 2.5k rpms on launch. That's good for about 0.2 of a second right there (but may also cause things to break...)
![bowdown](https://rennlist.com/forums/graemlins/bowdown.gif)
Here's his run -vs- my best run which I took to 143. Look at the 0-130 times! He's almost 5 full seconds faster! I can't even imagine what that must be like! Super job, Murph! But I think you could do better. Looking at the RPM scale, you didn't even rev it to 2.5k rpms on launch. That's good for about 0.2 of a second right there (but may also cause things to break...)
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#42
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
He is also shifting, at, ahem, 7k rpm. Because its still, um, pulling up there. Like a fighter jet pulling off an aircraft carrier.
#43
Addict
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Join Date: Jan 2003
Location: Green Bay Wisconsin
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by BrendanC
He is also shifting, at, ahem, 7k rpm. Because its still, um, pulling up there. Like a fighter jet pulling off an aircraft carrier.
I won't be doing too many more of these runs any time soon. The car does not feel safe accelerating as hard as it does. The drag radials are a little taller than stock, which is what the ride height is set for. Scrubbing off the speed at the end of a run gets pretty squirrelly.
For those that said they would love to get a ride in this thing you might want to think twice about that. There is not one person that I have given a ride that was comfortable sitting in the passenger seat. About 5000 rpm in 3rd is when the screaming usually starts.
#44
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Tim Murphy
I bounced the rev limiter in 1st, 2nd, and 3rd. Just one bounce in each gear.
I won't be doing too many more of these runs any time soon. The car does not feel safe accelerating as hard as it does. The drag radials are a little taller than stock, which is what the ride height is set for. Scrubbing off the speed at the end of a run gets pretty squirrelly.
For those that said they would love to get a ride in this thing you might want to think twice about that. There is not one person that I have given a ride that was comfortable sitting in the passenger seat. About 5000 rpm in 3rd is when the screaming usually starts.
I won't be doing too many more of these runs any time soon. The car does not feel safe accelerating as hard as it does. The drag radials are a little taller than stock, which is what the ride height is set for. Scrubbing off the speed at the end of a run gets pretty squirrelly.
For those that said they would love to get a ride in this thing you might want to think twice about that. There is not one person that I have given a ride that was comfortable sitting in the passenger seat. About 5000 rpm in 3rd is when the screaming usually starts.
I'd go, as long as its on 172 or 57, and not, like, down one o f the back roads in Alluez.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#45
Supercharged
Rennlist Member
Rennlist Member
Join Date: May 2002
Location: Back in Michigan - Full time!
Posts: 18,925
Likes: 0
Received 61 Likes
on
35 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'd go. And yes, I'd feel like my bung was welded shut, and I might even put my foot through the firewall, but then... that's why i want a ride! ADRENALIN!
![evilgrin](https://rennlist.com/forums/graemlins/evilgrin.gif)