When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi, go to Kenne Bells web site, they still support the Auto Rotor Twin Screw as they worked together and ended up buying Auto Rotor and Improving on the Twin Screw design.
They service the units and sell the parts too.
If you are trying to upgrade the pulley on the "Cameron Car", that is an MP112 Eaton supercharger originally from an XKR Jaguar.
I was thinking about it but now I may just upgrade the supercharger itself and install some larger injectors that it needs. Not sure why since it’s running so darn good!
Took a stop at the machine shop before heading down to Third Coast. Throttle housings are coming along. They are supposed to get the shafts and blades machined this week, and then start the process of boring the housings to match. Slow, but progress.....
Took a stop at the machine shop before heading down to Third Coast. Throttle housings are coming along. They are supposed to get the shafts and blades machined this week, and then start the process of boring the housings to match. Slow, but progress.....
Its been forever in the making... literally forever. This assembly did not want to be born. Purchase orders sent to multiple shops, all had issues. This last one was issued in July and I just now have the parts.
Hoping to get a functional prototype using the printed parts put together tonight, just to verify everything is ready to go for machining the idle stabilizer block and the linkage pieces. I will get pictures posted of that here this week.
10-11-2018, 04:32 PM
