Modifying timing/fuelling easily and effectively
11-23-2005, 01:23 AM
#61
928 Collector
Rennlist Member
Rennlist Member
Steven you're off my ignore list. But I see you complain that we aren't open to new ideas. Not so. it's just that your ideas so far are not new. If you read the forum before tossing ideas out it will definitely help you. And also, it would be good if you could be nice.
All the best for now.
Heinrich
All the best for now.
Heinrich
11-23-2005, 01:32 AM
#62
Inventor
Rennlist Member
Rennlist Member
Public domain - beyotch!
Don't be too hard on the lad, he's probably just off his meds. If he has an S4, he's still OK in my book. Just has to slow down a bit.
928S4? RennTech Forums
I kinda like this SJSJ login site - probably not our SJ though. Sexy Indians Forums
Note to self: always use new logins!
928S4? RennTech Forums
I kinda like this SJSJ login site - probably not our SJ though. Sexy Indians Forums
Note to self: always use new logins!
11-23-2005, 01:37 AM
#63
928 Collector
Rennlist Member
Rennlist Member
Well Ken there you go 
.... we're stuck with our Aussie buddy Steven <sigh> .... we're gonna have to help him along a bit. So Steven, listen to Sterling and Louie regarding ignition and injection for now. Send them a PM and tell them you'd like to learn something about your car. K? 
.... we're stuck with our Aussie buddy Steven <sigh> .... we're gonna have to help him along a bit. So Steven, listen to Sterling and Louie regarding ignition and injection for now. Send them a PM and tell them you'd like to learn something about your car. K?
11-23-2005, 01:41 AM
#64
Banned
Join Date: May 2001
Location: The Great Northwest
Posts: 12,264
Likes: 0
Received 3 Likes
on
3 Posts
Does he have to sell his Toyota to become a 'good guy'?
Reminds me of the difference between a Porsche owner and a porcupine.
Dude that was classic Steven, so you're a Toyota man ... man you should know better, I thought all Aussies were level-headed good guys 
.... So anyway Steven ... why the sudden urge to **** Porsche 928 owners off? Did you buy one? Ae you planning on buying one?
Reminds me of the difference between a Porsche owner and a porcupine.
Originally Posted by heinrich
Dude that was classic Steven, so you're a Toyota man ... man you should know better, I thought all Aussies were level-headed good guys .... So anyway Steven ... why the sudden urge to **** Porsche 928 owners off? Did you buy one? Ae you planning on buying one?
11-23-2005, 01:49 AM
#65
Inventor
Rennlist Member
Rennlist Member
Rule #54-1a Never criticize a man for the car he drives unless he claims his pos is faster than yours 
11-23-2005, 04:08 AM
#67
Advanced
Thread Starter
Join Date: Nov 2005
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
** OFF TOPIC ALERT #10001: WOZZA #2 **
* Nope, wrong. Can I ask who gave you such information and why it is being pasted into this forum? Not me, that's for sure. Check in my profile if you like.
* Splashing even supposed information about me over the Internet without prior consent does break quite a few Privacy Laws. This is serious business these days, where one could find themselves being labelled a criminal. As I understand criminal activity in this forum is illegal, so if you're booted out you know why.
* From the forum rules I can see this is a good, clean, ethical forum, which doesn't discriminate on colour, race or religion. Even Neo-***** or satanists can join so long as they behave honorably towards other humans.
* If you do want my email address, just ask, but do so via private messaging. I Please remember, I have the choice of giving it to you and please don't be hurt if I choose not to. Some of us are just not into the same sort of stuff. K? Example, I'm not into goats myself. Buggers of a thing. Iif you don't feed them then your *** becomes it's grass!! Messy. Though others might be and that's all cool.
Now is there still a topic for discussion here, coz the deviation of path here is not by my choice. I'd rather be talking about 928, 928s4, 928gt or 928gts and I'm sure others would too. Otherwise if you wish I can start a forum on Yahoo called "AboutMe" and we can discuss all the details about me if you wish
Originally Posted by heinrich
Well Ken there you go .... we're stuck with our Aussie buddy Steven <sigh> .... we're gonna have to help him along a bit. So Steven, listen to Sterling and Louie regarding ignition and injection for now. Send them a PM and tell them you'd like to learn something about your car. K?
.... we're stuck with our Aussie buddy Steven <sigh> .... we're gonna have to help him along a bit. So Steven, listen to Sterling and Louie regarding ignition and injection for now. Send them a PM and tell them you'd like to learn something about your car. K? * Splashing even supposed information about me over the Internet without prior consent does break quite a few Privacy Laws. This is serious business these days, where one could find themselves being labelled a criminal. As I understand criminal activity in this forum is illegal, so if you're booted out you know why.
* From the forum rules I can see this is a good, clean, ethical forum, which doesn't discriminate on colour, race or religion. Even Neo-***** or satanists can join so long as they behave honorably towards other humans.
* If you do want my email address, just ask, but do so via private messaging. I Please remember, I have the choice of giving it to you and please don't be hurt if I choose not to. Some of us are just not into the same sort of stuff. K? Example, I'm not into goats myself. Buggers of a thing. Iif you don't feed them then your *** becomes it's grass!! Messy. Though others might be and that's all cool.
Now is there still a topic for discussion here, coz the deviation of path here is not by my choice. I'd rather be talking about 928, 928s4, 928gt or 928gts and I'm sure others would too. Otherwise if you wish I can start a forum on Yahoo called "AboutMe" and we can discuss all the details about me if you wish
11-23-2005, 06:41 AM
#68
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
"* Go too far and allow the knock sensors to kick in, no boom necessary, other than the loss of breath you get from fearing the boom whenever you turn the key."
This is where you earned my ignore list. That and the repeated posting of the 944 AFM picture.
This is where you earned my ignore list. That and the repeated posting of the 944 AFM picture.
11-23-2005, 01:17 PM
#69
Drifting
sjsj, when you put information into a public profile, here or elsewhere, it is public domain. Also, no personal info was republished, we were just shown were to find info that YOU published in the public domain.
Also, whats up AMAF?
Also, whats up AMAF?
11-23-2005, 01:17 PM
#70
Rennlist Member
Welcome to the official website of the Nibiruan Council, an off world council of beings from many parts of the universe connected to the planet Nibiru. The Nibiruans’ mission is to prepare humanity to take their rightful place in the greater galactic community
11-23-2005, 01:30 PM
#71
Inventor
Rennlist Member
Rennlist Member
Originally Posted by sjsj
1 Nope, wrong. Can I ask who gave you such information and why it is being pasted into this forum? Not me, that's for sure. Check in my profile if you like.
2 Splashing even supposed information about me over the Internet without prior consent does break quite a few Privacy Laws.
3 From the forum rules I can see this is a good, clean, ethical forum, which doesn't discriminate on colour, race or religion. Even Neo-***** or satanists can join so long as they behave honorably towards other humans.
2 Splashing even supposed information about me over the Internet without prior consent does break quite a few Privacy Laws.
3 From the forum rules I can see this is a good, clean, ethical forum, which doesn't discriminate on colour, race or religion. Even Neo-***** or satanists can join so long as they behave honorably towards other humans.
2 Again, public information about someone who calls themself 'sjsj', and it's not been typed here.
3 Even 928 drivin' Starseeds are welcome here, AFAIK.
...
*Sound familiar?
Toymods » General Car Talk » $25/50US real-time logger for O2,AFM/MAF/MAP,TPS,RPM found!!
Originally Posted by sjsj
Hi Everyone,
Brilliant news!! Found an inexpensive real-time logger to monitor any analog input signals on your car between -10V and +10V!! eg: O2 signal, AFM/MAF/MAP, TPS, fuel injectors, RPM, etc.
Examples of logged data (wideband O2 signal vs RPM) while accelerating is here:
http://cyberdave.org/carwb.html
http://cyberdave.org/CarTest.html
--------------------
Cost/feature Details
--------------------
1/ DI-194RS $24.95US
* 4 single-ended analog input channels ±10VFS.
* 10-bit measurement resolution
* RS-232 PC interface connection
* 240Hz maximum sample throughput
* details at http://www.dataq.com/products/startkit/di194rs.htm
2/ DI-148U $50US
* 8 single-ended analog input channels, ±10Volt full scale range.
* 10-bit measurement resolution
* USB PC interface
* Up to 14,400 Hz sample throughput rate,
* Six digital TTL I/O lines for general purpose I/O.
* Details at http://www.dataq.com/products/startkit/di148.htm
Note: Appears to require expensive WinDAQ software to extract full capabilities. Consider alternative shareware/free software below:
-------------------------------------------------- ----------
Shareware/freeware software to drive a DataQ device ($25US)
-------------------------------------------------- ----------
http://www.ultimaserial.com/
http://groups.yahoo.com/group/ultimaserial_group/
--------
Comments
--------
I like the sounds of the USB model myself. Group buy anyone?
Note: not affiliated with DataQ in anyway. Just sharing the good news.
sjj
Brilliant news!! Found an inexpensive real-time logger to monitor any analog input signals on your car between -10V and +10V!! eg: O2 signal, AFM/MAF/MAP, TPS, fuel injectors, RPM, etc.
Examples of logged data (wideband O2 signal vs RPM) while accelerating is here:
http://cyberdave.org/carwb.html
http://cyberdave.org/CarTest.html
--------------------
Cost/feature Details
--------------------
1/ DI-194RS $24.95US
* 4 single-ended analog input channels ±10VFS.
* 10-bit measurement resolution
* RS-232 PC interface connection
* 240Hz maximum sample throughput
* details at http://www.dataq.com/products/startkit/di194rs.htm
2/ DI-148U $50US
* 8 single-ended analog input channels, ±10Volt full scale range.
* 10-bit measurement resolution
* USB PC interface
* Up to 14,400 Hz sample throughput rate,
* Six digital TTL I/O lines for general purpose I/O.
* Details at http://www.dataq.com/products/startkit/di148.htm
Note: Appears to require expensive WinDAQ software to extract full capabilities. Consider alternative shareware/free software below:
-------------------------------------------------- ----------
Shareware/freeware software to drive a DataQ device ($25US)
-------------------------------------------------- ----------
http://www.ultimaserial.com/
http://groups.yahoo.com/group/ultimaserial_group/
--------
Comments
--------
I like the sounds of the USB model myself. Group buy anyone?
Note: not affiliated with DataQ in anyway. Just sharing the good news.
sjj
11-23-2005, 04:21 PM
#72
Three Wheelin'
Join Date: Nov 2003
Location: Los Angeles, CA
Posts: 1,577
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FlyingDog
Click sjsj's name on the left, view his public profile, in the upper right is add to your ignore list. 
I'm not sure if Rennlist is set up to not show his posts or show them as blank. Most forums show the post with no content.
I'm not sure if Rennlist is set up to not show his posts or show them as blank. Most forums show the post with no content.
Good idea!
11-23-2005, 04:39 PM
#75
Originally Posted by Louie928
SG,
How do you do that? I'm feeling a great need. I don't want to have to look at the author of every thread before I decide to pass.
How do you do that? I'm feeling a great need. I don't want to have to look at the author of every thread before I decide to pass.
I need to to read my threads so you and H and Jim Baily can continue to call me nuts. Its an important part of my daily ritual.