X-Post: FS '87 Slate Grey metallic 944 with Turbo Cup Suspension
#1
X-Post: FS '87 Slate Grey metallic 944 with Turbo Cup Suspension
Cross post from members for sale section.
We all know how the story goes - baby comes along and projects must go away
Low mileage Bilstein Turbo Cup Suspension (Firehawk valved fronts with 400 lb. Hypercoil springs, Escort valved rear coilovers with 200 lb springs and helper springs). SOLD
-KLA monoball front strut mounts - SOLD
-16 x 7 & 16 x 9 2 piece Etoile 455 wheels, recently refurbished, Stainless Steel Hardware, Toyo R888 245/45/16 tires with 75% tread - $750
-944 Turbo Brembo brakes - $500 for entire conversion parts (except struts) front & rear
-Late offset NA suspension parts (hubs, spindles, rotors)
Sport seats are being sold as well - Burgundy, no rips/tears, $800.
We all know how the story goes - baby comes along and projects must go away
Low mileage Bilstein Turbo Cup Suspension (Firehawk valved fronts with 400 lb. Hypercoil springs, Escort valved rear coilovers with 200 lb springs and helper springs). SOLD
-KLA monoball front strut mounts - SOLD
-16 x 7 & 16 x 9 2 piece Etoile 455 wheels, recently refurbished, Stainless Steel Hardware, Toyo R888 245/45/16 tires with 75% tread - $750
-944 Turbo Brembo brakes - $500 for entire conversion parts (except struts) front & rear
-Late offset NA suspension parts (hubs, spindles, rotors)
Sport seats are being sold as well - Burgundy, no rips/tears, $800.
Last edited by Chris@Fabspeed; 11-28-2013 at 11:45 PM.
#2
Rennlist Member
Hot dang. I am sweating over those wheels right now. And the suspension, for that matter.
If I lived in the area I would have called you by now. Just too far for me.
Good luck with the sale! I sure hope somebody picks this project up immediately!
If I lived in the area I would have called you by now. Just too far for me.
Good luck with the sale! I sure hope somebody picks this project up immediately!
#3
Thanks for the compliments. I just refurbished the wheels and used stainless hardware. If the car doesn't sell by Thurs. I will contact you about the wheels. The centers have a circular brushed finish to mimic a machined finish.
Trending Topics
#8
Now parting this car out, so the Suspension/wheels/tires are for sale (and almost everything else - not for sale are trans, ,engine, and that's about it)
All suspension has low highway miles, no track days
Bilstein Firehawk valved front shocks -
Bilstein Escort Cup vavled rear shocks
Lindsey Racing Top Hats
KLA monoball strut mounts
Hypercoil 400 lb/in front springs, 200 lb/in rear springs with Eibach helpers
Best offer over $1000 (combined value over $2100 retail)
16 x 7 and 16 x 9 Etoile 455 2 Piece wheels with Toyo R888 tires (75% or better tread)
Best offer over $600
All suspension has low highway miles, no track days
Bilstein Firehawk valved front shocks -
Bilstein Escort Cup vavled rear shocks
Lindsey Racing Top Hats
KLA monoball strut mounts
Hypercoil 400 lb/in front springs, 200 lb/in rear springs with Eibach helpers
Best offer over $1000 (combined value over $2100 retail)
16 x 7 and 16 x 9 Etoile 455 2 Piece wheels with Toyo R888 tires (75% or better tread)
Best offer over $600
#9
I may be interested in the suspension setup. Where are you located? Also, any comments on how it rides on the street (my car is my DD get-to-work machine)? These would work on a 968 right?
#10
This setup rides very nice for the street, which is why I picked the Firehawk fronts and the spring rates I did. Yes they will bolt right onto your 968.