86 Turbo Billet Hubs
#63
Team Owner
Join Date: Oct 2009
Location: one thousand, five hundred miles north of Ft. Lauderdale for the summer.
Posts: 28,705
Received 212 Likes
on
153 Posts
for the guys beating the oem **** half to death on the track of course....
might be fun to take Chop's stuff and a the 25 year old oem parts to a lab and have them stress tested...
#64
The new design hubs are the same 68mm height as the 87-up hubs. This pic shows why the 87-up rotor when placed over the 86T or NA hub (74mm height)
does not fit the factory caliper. When Porsche designed the 86T hub to get the factory 951 caliper to mount, they actually weakened the cast hub webbing.....
does not fit the factory caliper. When Porsche designed the 86T hub to get the factory 951 caliper to mount, they actually weakened the cast hub webbing.....
Last edited by xschop; 05-19-2012 at 10:11 PM.
#68
These are drilled 136mm PCD for all 9 series rotors. All later BBK adapters will now work on the early cars with 76mm caliper mounts as well as any BBK with 94mm axial mounts too. Just PM I have 3 sets left with new bearings and grease seals.
#71
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
__________________
Your Porsche Parts Superstore
Parts | Tech-Session | Facebook | Youtube
Jason Burkett
Paragon Products - Porsche Parts & Accessories*- 800.200.9366
Tech Session - Porsche Tech & Info*- 361.289.8834
jason@paragon-products.com
Your Porsche Parts Superstore
Parts | Tech-Session | Facebook | Youtube
Jason Burkett
Paragon Products - Porsche Parts & Accessories*- 800.200.9366
Tech Session - Porsche Tech & Info*- 361.289.8834
jason@paragon-products.com