hobiecat

I'm looking for a particular part and hopefully someone out there with a "parts car" has it. See the trim around the
hole in the picture? That's exactly what I need to line a hole I cut in the fender well for an oil line. The edges are
fairly smooth, but I'd like to have some of the lining in the picture to keep the line from coming in contact with the metal.

If anyone has any please let me know. I can't imagine it's worth anything....but I'd definitely pay the postage.

Let me know....Thanks!

Jim

V2Rocket

pretty sure you can find that stuff or similar at a good parts store in infinite lengths

hobiecat

Hmm. I've been looking at just about every parts store within 20 miles of my house with no luck. Guess they're not "good" parts stores.......

V2Rocket

do you have a NAPA near you?

hobiecat

Maybe...I'll check and see.

What is this stuff called anyway?

Will Feather

use some old door weatherstripping

NYFlapjack2

Called Welting I believe....

Got a old rear hatch gasket?
Mine came apart from the welting & oval soft part
Might be same stuff...

Door edge molding may work too...

Looks like boat building pinch welt
Scroll down the page here:
http://www.glfi.com/supplycatalogw.htm

whalebird

There is a bunch of different welting available. +1 on the hatch seal, but the inside door trim is identicle.
If your running aa oil line, get one of those thru-bulkhead adapters.

hobiecat

Welting! That's it! Thanks!