jmporsche944

Hey Guys, after all the problems with this car I made the hard decision to part it out. It is time for me to move on to something a little newer. It was a great car and there are tons of great parts that I hope make everyone else’s cars here that much better. All of the prices are before shipping. Some of this stuff is pretty heavy and shipping could be pretty expensive. All shipping prices will be calculated from 07456. All of these prices are OBO. I did my best to make the prices as fair as possible; I could be off with some stuff though. First person to PM me for a part will get the part. (So if you really want something, better off PMing me then replying here). If you want to come see anything before you get it feel free. I will be available during the weekend to show things. I will be making a trip to home where the car is to pack and ship things out, so nothing will be shipped out during the week. Sorry! If you want anything that is still on the car, let me know and I will take it out and send it! There is still a ton of stuff still on it! This is really just the big stuff listed right now! If you want any more information on any of the parts, let me know, I will tell everything I can. The pictures below are of the car before it was parted, and the parts off of it. Everything is dirty, I will clean it up before sending! Thanks!

Brembo Brakes (Big Reds) with stock rears? Rotors are brand new, they have about 1k miles on them. They were 850 for the set alone! – $1700
Front 968 M030 sway bar - $175
Weltmeister fully adjustable rear bar (still on car) – $250
Porsche Cup wheels painted black with tires (Front tred 90% rear 40%) Rear tires are yoko es100s, fronts are kuhmo ecstas. –$ 900
Tial wastegate 38mm with adapter plates (used for one month) – $300 SOLD
DME and KLR (with 951 max chips, will split up if needed) - $275
Black **** MBC/guage/panel (will split up as well) – $60 SOLD
3.0 bar Bosch FPR – $20 SOLD
Fuel rail (painted silver) – $40
Stock Injectors – $30 SOLD
Head (great condition, could use a cleaning, valves look good, ports are good) – $275
Cam Tower and lifters (painted red) – $40 SOLD
Intercooler – $50
OPRV (literally brand new, used for maybe 50 miles) – $300
Intake manifold (painted black) – $30 SOLD
Turbo (still on car, LOTS of shaft play, would need rebuild) – $50 SOLD
993 Seats, black leather, 8 way power, GREAT condition –$ 600
MOMO steering wheel with hub – $175 SOLD
Alternator –$ 35
GT Racing Nose Panel – $115 SOLD
Fiberglass front fenders – $175 SOLD (pending transaction)
AIR Splitter – $100 SOLD
Rear Valance (missing one of the studs on the long section, it worked fine on my car, didn’t shake or anything) –$ 140
Hatch – $40 (local pick up only)
Fans and shroud – $60
Sunroof Panel – $30
Headers and crosspipe – $100 SOLD
AC Delete bracket – $100 SOLD
Fog lights (complete assemblies, one is newer then the other) – $60 SOLD
Complete doors – $150 each, will split up, or sell handles/mirrors seperatly if no one wants the whole thing, passenger side door is from a red car, painted grey)
Gauge Cluster –$ 40 (13x,xxx miles) SOLD
Stereo – $50 SOLD
Short shift kit (transmission mounted) –$ 50 SOLD (pending tansaction)
Trim pieces for interior – Offer me something
Front clip – Offer me something
Alpine Speakers – $35
Fire Extinguisher – $60 (can it be shipped?) SOLD
Harness bar - $40

Marcquito

OH noooo! Another one bites the dust!

I'll give you my '95 GST for the big brake package.

Claus Groth

How much do you want for the center console compartment?

V2Rocket

now this is a damn shame
but alas, all the nice parts will go on to beautify many other cars.

got a good 951 oil cooler setup? and maybe interested in the IC

jmporsche944

30+ shipping (it uses two little metal hinges instead of the old pastic one) PM me if you are interested

jmporsche944

I do have the external oil cooler by the radiator if you are interested, and the IC is available too if you want it, PM me if you want anything!

isuras2

I'm interested in the turbo.

badcoupe

did the fenders fit very well? Do they gap right and mount sturdy? I'm getting ready to do a repaint and may be interested, but previous experience with glass stuff hasn't been good.

jmporsche944

The fenders did fit very well. I had a little gap issue between the hood and the fender on one side but I think it is due to a misaligned hood (it always had trouble latching as well). I have someone interested in them right now, if that falls through they are all yours if you want them.

V2Rocket

YGPM

83 944

how much for front nose panel?

67King

If you'd consider splitting up the hub and wheel, I'd be interested in the hub. No rush, so I'm willing to wait to see if you find a taker of the package.

Also, what part of northern New Jersey (how far from Newton)?

dillon410021

by nose panel, did you mean the header panel or the front bumper cover thing

Red_Envy

Damn, that was a HOT looking car!

billthe3

Damnit, I would have loved to get that header panel. Its the right color too... I'm contemplating getting the fenders, but don't hold them for me or anything. Any idea what shipping them to 94526 would cost?

Why are you parting it out?